Adapt-A-Case

GM TH350 700R4 4L60E Center Support Case Saver Assembly (1969-UP)

TH350/TH350C - TH250/TH250C - 700R4/4L60 - 4L60E/4L65E Center Support Case Saver Kit This solution by Adapt-A-Case reinforces center support and is laser cut from high tensile steel for strength and...

GM TH400 HD Intermediate Snap Ring Support by Adapt-A-Case

GM Turbo 400 HD Intermediate Snap Ring Support Made in the USA by Adapt-A-Case Gotta love it!  Buy the good clutches, a fancy trans-brake valve body, the HD sprags, all the stuff you can think...

JF009E RE0F08A/B Transmission Variator Clamp C by Adapt-A-Case

This is an add-on for the T-VTAC which fits around Subaru and Nissan JF009E and RE0F08A/B variators. Adapt-A-Case Part Number: T-CVTSUBAC

NP246 NP261 NP263 GM Transfer Case Front Output Seal Install Tool by Adapt-A-Case

New Process 246 / 261 / 263 Front Output Seal Installation Tool Works on 1999-UP General Motors Full-Sized Trucks Easily places this expensive two-piece seal where it needs to be every time. ...

NV4500 Transmission 5th Gear Nut Remover & Installer

Dodge/GM 5-Speed NV4500 Transmission 5th Gear Nut Remover & Installer Also Fits 4WD Allison 1000/2000 Series Transmissions Why have two different wrenches to buy and keep track of when you can...

PTO Bench Mount Adapter 1-1/2'' by Adapt-A-Case

PTO Bench Mount Adapter w/ 1.5'' Diameter Shaft Fits Allison LCT1000 & Most Transmissions w/ PTOs Many standard transmissions, transfer cases and hefty duty units like the Allison LCT and Ford...

PTO Bench Mount Adapter 1-3/8'' by Adapt-A-Case

PTO Bench Mount Adapter w/ 1-3/8'' Diameter Shaft Fits Allison LCT1000 & Most Transmissions w/ PTOs Many standard transmissions, transfer cases and hefty duty units like the Allison LCT and Ford...

Subaru Gen-2 CVT Variator Opener

Opening a variator on a Subaru Gen 2 takes a unique spreader.  With this tool, simply insert the plate and line up the bolts and washers to the case.  Then add the nuts and start...

The Seal Buddy Sub Kit Torque Conveter/Front Seal Installer

Tool Rental - Example 2 (New Part w/ Rental Option)

Doing this option will eliminate the new tool being available in cutsom kits or adders on other items. If we did it on the item level we could have a check box that says agree to rental terms and...

Toyota U140 U240 Series Transmission Specialty Spanner Socket

Toyota U140/U240 Transmission Spanner Socket Works on Lexus RX300, Toyota Rav 4 and Toyota Camry with U140 or U240 Series Transmissions After many requests from transmission rebuilders, Adapt-A-Case...

Toyota U660 Transmission Specialty Spanner Socket

Toyota Camry U660 Transmission Spanner Socket  Made in the USA by Adapt-A-Case This tool is necessary to completely disassemble the Toyota U660E automatic transmission.  Hardened and built...

U340E U341E Output Shaft Nut Special Spanner Socket Tool by Adapt-A-Case

Toyota/Lexus U340E & U341E Output Shaft Nut Specially Spanner Socket Made in the USA by Adapt-A-Case This output shaft nut socket has been engineered by the experts at Adapt-A-Case to make...

Universal GM Rear Wheel Drive Transmission Holding Fixture

The T-48909AC holding fixture attaches to rear wheel drive GM transmissions.  this fixture requires a 1.5'' receiver and yoke from the Adapt-A-Case T-0156TCAC. This fixture will not work on...

VW 095 096 01M Transmission Pinion Shaft Removal Tool Kit by Adapt-A-Case

VW 095/096/01M Transmission Pinion Shaft Removal Tool Kit Beetle - Jetta - Golf - Passat Made in the USA by Adapt-A-Case Servicing of the pinion shaft seal, cone bearing and race has now been...

ZF8HP Series Transmission Two Piece Ring Set by Adapt-A-Case

ZF8HP Series Transmission Two Piece Ring Set These two rings are used to protect the aluminum drums from cracking when removing the HD snap ring.  These rings are machined to fit the four...