Ford E4OD Torque Specifications (1989-1998)
Hardware torque specifications for the Ford E4OD automatic transmission, 1989-1998, in newton-meters (N·m) and foot-pounds (ft-lb).
| Fastener | N·m | ft-lb |
|---|---|---|
| Inner OWC Race to Case Bolt | 24-34 N-m | 18-25 ft-lb |
| Connector to Case Cooler Line | 24-21 N-m | 18-23 ft-lb |
| Line Pressure Case Plug | 8-16 N-m | 6-12 ft-lb |
| Throttle Pressure Case Plug | 8-16 N-m | 6-12 ft-lb |
| Inner & Outer Lever to Manual Control Shaft | 40-54 N-m | 30-40 ft-lb |
| Positive Detent Spring to Case Bolt | 9-11 N-m | 6-8 ft-lb |
| Parking Rod Guide Plate to Case Bolt | 22-27 N-m | 16-20 ft-lb |
| Neutral Switch Assembly to Case Bolt | 6-8 N-m | 4-6 ft-lb |
| Center Support to Hub Bolt | 9-14 N-m | 6-10 ft-lb |
| Center Support Fluid Feed Bolt | 11-16 N-m | 8-12 ft-lb |
| Extension Housing to Case Bolt | 27-39 N-m | 20-29 ft-lb |
| Extension Housing to Case Bolt 2X4 | 27-39 N-m | 20-29 ft-lb |
| Extension Housing to Case 4X4 | 27-39 N-m | 20-29 ft-lb |
| Stator Support to Pump Body Bolt | 9-11 N-m | 6-8 ft-lb |
| Oil Pump Body to Case Bolt | 24-31 N-m | 18-23 ft-lb |
| Reinforcing Plate to Case Bolt | 9-11 N-m | 6-8 ft-lb |
| Main Accumulator & Solenoid Body to Case Bolt | 9-11 N-m | 6-8 ft-lb |
| Main & Lower Body to Case Bolt | 9-11 N-m | 6-8 ft-lb |
| Lower Body to Main Body Bolt | 9-11 N-m | 6-8 ft-lb |
| Solenoid Body to Case Bolt | 9-11 N-m | 6-8 ft-lb |
| Parking Rod Abutment to Case Bolt | 22-27 N-m | 16-20 ft-lb |
| Control Assembly to Pump Bolt | 24-31 N-m | 18-23 ft-lb |
| Oil Pan to Case Bolt | 14-16 N-m | 10-12 ft-lb |
| Torque Converter Drain Plug | 24-27 N-m | 18-20 ft-lb |
| Overdrive Cylinder Fluid Feed | 8-14 N-m | 6-10 ft-lb |
| Valve Body to Case Short Stud | 9-11 N-m | 6-8 ft-lb |
| Valve Body to Case Long Stud | 9-11 N-m | 6-8 ft-lb |
| Valve Body to Case Nut | 9-11 N-m | 6-8 ft-lb |
| Manual Detent Lever Nut | 41-54 N-m | 30-40 ft-lb |
Back to Ford Transmission Info · Shop Ford E4OD transmission parts