Bearings & Washers

TH400 Stator Washer .106″ (between pump and fwd drum)

Part number: 34211DFits: TH400 A stator washer for TH400 and 3L80 automatic transmissions, fitted between the pump and the forward drum as its name describes. It measures .106 inches thick and is...

TH400 Bearing Kit | Sonnax

Sonnax part number: SBK-G10Fits: TH400 A bearing kit for GM's TH400 automatic transmission, made by Sonnax as a matched set rather than individual bearings. It includes the sun/internal gear bearing,...

TH400 4L80E 4T60E 4T65E Output & Reaction Planetaries Pinion Washer | Sonnax | 8-Pack

Sonnax part number: 34875-03Fits: TH400, 4L80E, 4T60E, 4T65E A pinion washer for the output and reaction planetaries in TH400, 4L80E, 4L85E, 4T60E and 4T65E transmissions, made by Sonnax, sold...

4L80E TH400 TH425 Rear Unit Endplay Shim | Sonnax | .005'' | 10-Pack

Sonnax part number: 34006-05 TH400 TH425 4L80E 4L85E Rear Unit Endplay Shim | 0.005'' Thick No tooling required Sonnax offers two solutions for excessive endplay in GM TH400, TH425, 4L80-E and 4L85-E...

TH400 4L80E 4L85E 3 Tang Rear Case Washer (Case Saver)

Part number: 34270TFits: TH400, 4L80E, 4L85E 3-tang rear case saver washer for TH400, 3L80E and 4L80E transmissions, made by Fitzall, part number 34270T. It is used to reinforce a spun-out case at...

TH400 Pump Stator Shim Washer .117″

Part number: 34211EFits: TH400 A pump stator shim washer for GM TH400 and 3L80 automatic transmissions, .117 inches thick, sold individually for that stator position. It sits at the stator position...

TH400 Pump Thrust Bearing Kit | Sonnax

Sonnax part number: 34211-01K TH400 Pump Thrust Bearing Kit by Sonnax GM TH400 transmissions set front endplay with selective thrust washers between the pump and forward drum. In heavy-duty and...

4L80E TH400 HD Case Bushing Kit | Sonnax

Sonnax part number: 34006-SPB Case bushing walkout and thrust washer wear are common issues in the GM TH400, 4L80-E and 4L85-E units. Sonnax heavy duty case bushing kit 34006-SPB combines the tried...

4L80E TH400 Torrington Bearing Kit (All Years)

Part number: 1014BFits: 4L80E, TH400 A Torrington bearing kit for GM TH400 and 4L80E automatic transmissions, covering all model years of both transmissions. The kit supplies the Torrington bearings...

4L80E TH400 4T65E Pinion Thrust Washer - Pre-1998 (Pack of 8)

Sonnax part number: 34875-04Fits: 4L80E, TH400, 4T65E A pinion thrust washer from Sonnax for '98-earlier GM TH400, 4L80-E and 4T65-E output and reaction planetaries built with .750 inch wide pinion...

4L80E TH400 Front/Rear Unit Endplay Shim - Upgraded (Pack of 10)

Sonnax part number: 34500-Z It is often difficult to reduce front unit endplay on 400 or 4L80/85-E units with excessive spline wear. Normal component wear allows excess forward and direct drum travel...

4L80E TH400 HD Forward Clutch Hub Washer - Rear 0.078'' (Pack of 5)

Sonnax part number: 34301-078Fits: TH400, 4L80-E, 4L85-E Package Quantity: 5 A pump that has been resurfaced or accumulated shaft spline wear creates excessive endplay of the forward and direct drums...

4L80E TH400 HD Forward Clutch Hub Washer - Rear 0.094″ (Pack of 5)

Sonnax part number: 34301-094Fits: TH400, 4L80-E, 4L85-E Package Quantity: 5 A pump that has been resurfaced or accumulated shaft spline wear creates excessive endplay of the forward and direct drums...

4L80E TH400 HD Forward Clutch Hub Front Washer (Pack of 5) 0.078″

Sonnax part number: 34298-078 Pack of 5 Sonnax forward clutch hub front washer 34298-078 replaces the OE .063" thick washer between the forward clutch hub and the forward drum. It is .015" thicker...

TH400 4L80E Output Shaft to Case Selective Washer (3 Tang - 0.076″)

Part number: D34269Fits: TH400, 4L80E A new AC Delco selective washer for the TH400 and 4L80E output shaft to case fit, built 1965-1998. It is the 3-tang style and measures 0.076'' thick, used to set...

TH400 4L80E Output Shaft to Case & Front Planet to Rear Planet Washer (1965-UP) 4-Tang Metal

Part number: 34268Fits: TH400, 4L80E · 1965-up A 4-tang metal thrust washer for GM TH400 and 4L80E automatic transmissions built from 1965 on. It is used both at the output shaft where it meets the...

TH400 Thrust Washer Kit w/ Selectives (1964-ON)

Part number: 1409Fits: TH400 · 1964-ON A thrust washer kit with selective washers for the TH400, covering transmissions built from 1964-on. It bundles the various thrust washer positions used in the...

A500 A727 A518 A618 A904 Powerglide Pump Bolt Washer

Part number: 1113A A pump bolt washer for Chrysler A500, A727, A518, A618 and A904 transmissions and GM Powerglide transmissions, used at the pump bolt position. Seven washers are used per pump. The...