Steel Plates & Modules

C6 Reverse Steel Plate | 0.068'' / 1.75mm (1966-1996)

C6 E4OD 4R100 Forward & Direct Steel Plate | 0.059'' | 26-Tooth

0.059'' Thick 26-Tooth 5.121'' Inner Diameter

C6 Forward Clutch Kolene® Steel Plate | 1976-1996 | .080"| 6.578" OD | 26 Teeth

C6 Forward (.080") Kolene® Steel Clutch Plate (1976-1996) (.080", 2.03mm) (6.578" OD) (26 Teeth)

C6 E4OD 4R100 5R110W Low Reverse Kolene® Steel Clutch Plate (1989-On) (.069", 1.75mm) (7.204" OD) (18 Teeth)

C6 E4OD 4R100 5R110W Low Reverse Kolene® Steel Clutch Plate (1989-On) (.069", 1.75mm) (7.204" OD) (18 Teeth)

C6 E4OD 4R100 Reverse Clutch Pressure Plate | 18-Tooth | 0.40''

This is a good used pressure plate for the reverse clutch pack in Ford C6, E4OD and 4R100 automatic transmissions. 18-Tooth 0.400'' Thick

C6 E4OD 4R100 Direct Clutch Steel Plate - HD Kolene .059" (1966-2004)

This is a heavy duty upgraded Kolene coated direct clutch steel plate for Ford 4R100, C6 and E4OD automatic transmissions manufactured from 1966 and up. 0.059 Thick(these are not the normal thickness for E4OD/4R100 Fwd/Dir, see SKU:51K453 for .080")

C6 E4OD 4R100 Forward Beveled Pressure Plate (1966-2005) Bottom

This is a good used Forward clutch bottom beveled pressure plate found in Ford C6, E4OD and 4R100 transmissions manufactured from 1966 to 2005. 0.297'' Thick  

C6 E4OD 4R100 Forward Clutch Powerpack 1966-UP (Tan Frictions with Normal Steels)

Ford C6/E4OD/4R100 Transmission Forward Clutch Performance Powerpack Made in the USA by Alto Products Corp Contents (6) 026710 Friction Plates (6) 026701A Steel Plates (1) 026760-630 Top Pressure Plate (1) 026760A673 Bottom Pressure...

C6 E4OD Direct Clutch Powerpack (1966-UP)

Ford C6 E4OD 4R100 Transmission Forward Clutch PowerPack Made in the USA by Alto Products Corp 1966-UP Performance Upgrade for Stock, Heavy Duty and Race Applications Alto Part Number: 026757HP This kit will correct, prevent and reduce the complaints...

C6 Steel Plate Module (1966-UP)

This is a set of high quality replacement steels for Ford's C6 automatic transmission.  These are high quality steels made in the USA by Raybestos Powertrain or Alto Products.

C6 Kolene Coated Performance Steel Module (1966-1996)

FORD C6 TRANSMISSION KOLENE COATED STEEL PLATES ADVANTAGES of KOLENE C6 STEELS Enhances wear resistance 200% to 500% Enhances fatigue resistance 200% to 500% Higher heat resistance Increased lubricity Surface treated Engineered for high...