Metal Steel Plates & Modules

E4OD Steel Plate Module (1989-1996)

 

E4OD Kolene Steel Module (1989-1996)

This is a new Kolene coated steel plate module for Ford E4OD transmissions, made in the USA.

E4OD Steel Module (1997 Only)

C6 E4OD 4R100 Forward & Direct Steel Plate | 0.059'' | 26-Tooth

0.059'' Thick 26-Tooth 5.121'' Inner Diameter

C6 E4OD 4R100 5R110W Low Reverse Kolene® Steel Clutch Plate (1989-On) (.069", 1.75mm) (7.204" OD) (18 Teeth)

C6 E4OD 4R100 5R110W Low Reverse Kolene® Steel Clutch Plate (1989-On) (.069", 1.75mm) (7.204" OD) (18 Teeth)

C6 E4OD 4R100 Reverse Clutch Pressure Plate | 18-Tooth | 0.40''

This is a good used pressure plate for the reverse clutch pack in Ford C6, E4OD and 4R100 automatic transmissions. 18-Tooth 0.400'' Thick

C6 E4OD 4R100 Direct Clutch Steel Plate - HD Kolene .059" (1966-2004)

This is a heavy duty upgraded Kolene coated direct clutch steel plate for Ford 4R100, C6 and E4OD automatic transmissions manufactured from 1966 and up. 0.059 Thick(these are not the normal thickness for E4OD/4R100 Fwd/Dir, see SKU:51K453 for .080")

E4OD 4R100 5R110W Overdrive Brake Kolene Steel Plate - HD (1989-UP)

This is a high performance heavy duty overdrive Kolene coated steel plate for Ford E4OD, 4R100 and 5R110W automatic transmissions. Brands: Alto, Raybestos E4OD 1989 - 1997 4R100 1998 - 2005 TorqShift 2005 - 2005 5R110W 2005 - 2010

E4OD Coast Clutch Kolene Steel Plate - HD (1989-1997)

This is a high performance Kolene coated coast clutch steel plate for E4OD automatic transmissions manufactured from 1989 to 1997. Used on cast steel drum assemblies 60-Teeth Brands: Alto, Raybestos

E4OD 4R100 Intermediate Clutch Diaphragm Spring (1989-2000)

This is a new replacement diaphragm spring for the intermediate clutch in Ford E4OD and 4R100 transmissons manufactured from 1989 to 2005.  

C6 E4OD 4R100 Forward Beveled Pressure Plate (1966-2005) Bottom

This is a good used Forward clutch bottom beveled pressure plate found in Ford C6, E4OD and 4R100 transmissions manufactured from 1966 to 2005. 0.297'' Thick  

E4OD 4R100 Low-Reverse Pressure Plate (1989-UP) 16T-0.550''

This is a good used low/reverse pressure plate found in E4OD and 4R100 transmissions manufactured from 1989 and up. 16-Tooth 0.550'' Thick