Single Clutch Plates & Case Specials

TH400 4L80E Rubber Clutch Separator | Sonnax | Use w/ 0.080'' Clutches | 60-Pack

Sonnax part number: ORCS-103-380 FOR USE WITH FRICTIONS ABOUT 0.080'' THICK

TH400 4L80E Forward Clutch HE Friction Plate (0.080'' / 2.03mm)

Part number: AL031702B200Fits: TH400, 4L80E A waffled HE forward clutch friction plate for TH400 and 4L80E transmissions built 1965-1995, 0.080" (2.03mm) thick, with a 5.926" outside diameter and 42...

4L80E Intermediate Clutch High Energy Friction Plate (1990-1996) Alto

Part number: AL031714Fits: 4L80E · 1990-1996 High Energy intermediate clutch friction plate for the 4L80E transmission, 1990-1996. HEG material, 47 teeth, 6.56 inch outside diameter, 0.081/2.06 mm...

TH400 4L80E Forward Direct Clutch High Energy Friction Plate .080″

Part number: AL031702A200Fits: TH400, 4L80E A high-energy forward/direct clutch friction plate for the TH400 and 4L80E, made in the USA by Alto Products Corp. It measures .080" thick with a 5.908"...

4L80E Intermediate Clutch High Energy Friction Plate (1997-UP) Alto (071″, 47TH)

Part number: AL031714K180 A High Energy intermediate clutch friction plate made in the USA by Alto Products Corp for late-model GM 4L80E (TH400) automatic transmissions from 1997-UP. It has 47 teeth,...

4L80E Overdrive Clutch HP Red Eagle Friction Plate

Part number: AL031748-200Fits: 4L80E A high-performance (HP) Red Eagle overdrive clutch friction plate for GM's 4L80E automatic transmission, made in the USA by Alto Products Corp. It is 0.08 inches...

4L80E Overrun Clutch HP Red Eagle Friction Plate

Part number: AL031746-200Fits: 4L80E An overrun clutch friction plate from Alto Products Corp for 4L80E transmissions, HP Red Eagle material, made in the USA. It measures 0.079 inches (2.01mm) thick...

4L80E Intermediate Clutch HP Red Eagle Friction Plate (1990-1996)

Part number: AL031744-200Fits: 4L80E · 1990-1996 A high-performance (HP) Red Eagle intermediate clutch friction plate for GM's 4L80E automatic transmission, covering units built 1990 to 1996, made in...

4L80E Intermediate Clutch GEN-2 Blue Plate Special Friction Plate (1996-UP) Raybestos

Part number: R577670Fits: 4L80E · 1996-up A GEN-2 Blue Plate Special intermediate clutch friction plate for late 1996-UP 4L80E automatic transmissions, made by Raybestos Powertrain. It is 0.70'' / 1...

4L80E 4th Clutch GEN-2 Blue Plate Special Friction Plate |Raybestos

Part number: R577680Fits: 4L80E Raybestos GEN-2 Blue Plate Special friction plate for the 4th clutch of the GM 4L80E. It measures 0.080'' (2.03mm) thick, with a 7.3'' outside diameter and a 60-tooth...

TH400 4L80E Forward Direct Clutch GEN-2 Blue Plate Special Friction Plate | Raybestos

Part number: R577420Fits: TH400, 4L80E A GEN-2 Blue Plate Special friction plate for the TH400 and 4L80E forward/direct clutch, made by Raybestos Powertrain. It measures 0.080'' (2.03mm) thick with a...

4L80E Overrun Clutch GEN-2 Blue Plate Special Friction Plate | Raybesots

Part number: R577690Fits: 4L80E An overrun clutch friction plate for the GM 4L80E transmission, made by Raybestos Powertrain in their GEN-2 Blue Plate Special material. It measures 0.080'' (2.03mm)...

TH400 4L80E Intermediate Clutch Gen-2 Blue Plate Special Friction Plate (1965-E1995) | Raybestos

Part number: R577430Fits: TH400, 4L80E A Gen-2 Blue Plate Special intermediate clutch friction plate for TH400 and 4L80E automatic transmissions, used from 1965 to early 1995. It measures 0.080'' / 2...

TH400 Intermediate Clutch Red Eagle Friction Plate | Alto

Part number: AL031742Fits: TH400 A Red Eagle friction plate from Alto Products Corp, made for the TH400 automatic transmission's intermediate clutch. It measures 0.09'' / 2.29mm thick, has a 6.56''...

4L80E Intermediate Clutch Stage-1 Friction Plate (1996-UP) Raybestos

Part number: R600290Fits: 4L80E · 1996-up A Raybestos Powertrain Stage-1 intermediate clutch friction plate for GM 4L80E transmissions built 1996 and later. It measures 0.070'' (1.78mm) thick with a...

4L80E Overrun Clutch Stage-1 Friction Plate

Part number: R600310Fits: 4L80E An overrun clutch Stage-1 friction plate from Raybestos Powertrain for GM's 4L80E transmission, made in the USA. It measures 0.079'' (2.01mm) thick with a 5.376''...

TH400 4L80E Intermediate Clutch Stage-1 Friction Plate

Part number: R600090Fits: TH400, 4L80E An intermediate clutch Stage-1 friction plate, made by Raybestos Powertrain, for TH400 and 4L80E transmissions. It measures 0.090 inches (2.29mm) thick, with a...

4L80E 4th Clutch Stage-1 Friction Plate | Raybestos

Part number: R600300Fits: 4L80E A 4th clutch Stage-1 friction plate for GM 4L80E automatic transmissions, from Raybestos Powertrain. It measures 0.080 inches (2.03mm) thick with a 7.3 inch outside...

TH400 4L80E Forward Direct Clutch Stage-1 Friction Plate | Raybestos

Part number: R600081Fits: TH400, 4L80E A Stage-1 friction plate from Raybestos Powertrain for the forward and direct clutch pack used in TH400 and 4L80E automatic transmissions, made in the USA. It...

TH400 4L80E Intermediate GPZ Friction (1964-1995)

Part number: GPZ108Fits: TH400, 4L80E · 1964-1995 An intermediate friction plate in GPZ material for the TH400 and 4L80E transmissions, also referenced as the 3L80, built 1964-1995. It measures ...