6T70 6T75 6F50 Info & Torque Specifications
6T70/6T75/6F50 Torque Specs
| DESCRIPTION | Nm | LB-FT | LB-IN |
| Differential Carrier Baffle Bolts | 12 | 9 | --- |
| Fluid Filler Tube Nut | 11 | 8 | --- |
| Fluid Reservoir Bolts | 12 | 9 | --- |
| Fluid Pump to Torque Converter Housing Bolts | 12 | 9 | --- |
| Line Pressure Tap Plug | 9 | --- | 80 |
| Manual Lever Nut | 18 | 13 | --- |
| Output Shaft Speed Sensor | 12 | 9 | --- |
| Park Pawl Retainer Bolts | 12 | 9 | --- |
| Shim Gauge Bolts | 24 | 18 | --- |
| Stator Support Feed Tube Hex Head Bolts | 12 | 9 | --- |
| Stator Support Feed Tube Torx Head Bolts | 7 | --- | 62 |
| Transmission Fluid Drain Plug | 9 | --- | 80 |
| Turbine Shaft Speed Sensor Bolt | 12 | 9 | --- |
| Valve Body Assembly Bolts | 12 | 9 | --- |
6T70/6T75/6F50 Line Pressure Chart
| GEAR | PRESSURE | |
| IDLE | WOT | |
| Park | 372-413 KPa (54-60 psi) | 372-413 KPa (54-60 psi) |
| Reverse | 689-724 KPa (100-105 psi) | 1724-2068 kPA (250-300 psi) |
| Neutral | 372-413 kPa (54-60 psi) | 372-413 kPa (54-60 psi) |
| Drive | 579-600 kPa (84-87 psi) | 1655-1724 kPa (240-250 psi) |
| Low | 579-600 kPa (84-87 psi) | 1655-1724 KPa (240-250 psi) |
6T70/6T75/6F50 Stall Speed
3.5L Engine (2350-2650 Stall Speed)
6T70/6T75/6F50 Clutch Clearences
| CLUTCH PACK | INCH | mm |
| Forward | 0.033-0.095'' | 0.84-2.42 |
| Low/Reverse | 0.040-0.100'' | 1.02-2.54 |
| Intermediate | 0.035-0.088'' | 0.89-2.24 |
| Overdrive | 0.044-0.090'' | 1.13-2.28 |
| Direct | 0.038-0.092'' | 0.98-2.34 |
6T70/6T75/6F50 Gear Ratio Chart
| GEAR | RATIO |
| 1st/Low | 4.484:1 |
| 2nd | 2.872:1 |
| 3rd | 1.842:1 |
| 4th | 1.414:1 |
| 5th | 1:1 |
| Reverse | 2.882:1 |
6T70/6T75/6F50 Transmission Fluid
Use Mercon V Automatic Transmission Fluid
XT-5QM or XT-5-QMC (USA) CXT-5-LM12
Fill Capacity: 9.5L (10qt)