Toyota | Lexus | Honda | Acura

JF011E RE0F10A CVT Pulley Tool Kit (2007-UP)

Pulley Tool KitFits JF011E (RE0F10A) 2007-on The JF011E CVT Pulley Tool Kit is a MUST HAVE if you are doing any repair work on CVTs CVTs, by their nature, make very fine metal that gets into everything. If the pump valve bore is shot, these kits will...

6F24 A4CF1/2 A6MF1/2 A6GF1 A6LF1/2/3 Universal Reducing Regulator Repair Tool Kit

Universal Reducing Regulator Repair Tool KitFor use with SK A4CF and SK A6MF  This reamer and guide tool kit is required to oversize the reducing regulator bores when using TransGo SHIFT KIT® Valve Body Repair Kit SK...

Subaru Gen-2 CVT Variator Opener

Opening a variator on a Subaru Gen 2 takes a unique spreader.  With this tool, simply insert the plate and line up the bolts and washers to the case.  Then add the nuts and start tightening evenly.  And just like that, the...

Honda 5-Speed Large Bearing & Sleeve Tool Kit Replacement Pieces

Replacement parts for Superior Transmission Parts K0110 Honda 5-Speed Large Bearing & Sleeve Removal Tool. Superior Transmission Parts # K0110-SPK

722.6 B1 Brake Drum Compression Ring by Adapt-A-Case

This is Adapt-A-Case's latest compression ring that is 6.0'' in diameter and made for the 722.6 B1 brake drum.  It is a great add-on for any rebuild with the Every Buddy Press. Adapt-A-Case Part Number: T-7226AC

CVT Pressure Test Adapter Set by Superior

CVT Pressure Test Adapter Set A must have for any shop rebuilding CVT units!  Made in the USA by Superior Transmission Parts Fits various CVT models with 10mm, 14mm and 22mm test port size, with o-ringed fittings.  These fittings have a...

A340 RE5R05A Low-Reverse Spring Compressor

This tool allows the user to quickly compress the springs of a low / reverse Toyota A340 & Nissan RE5R05A, to remove the snap ring. Self-centering body aligns easily in the rear case bushing. With a few simple turns of the wrist, the snap ring is...

Honda/Acura Transmission Shift Valve Air Check Tool by Superior STL-HOT

Honda/Acura Shift Valve Air Check Tool Made in the USA by Superior Transmission Parts The Honda/Acura Part # STL-HOT is designed for use during rebuild or during in car diagnosis and repair.  Air check valves after valve bodies and pump are torqued...

Honda 5-Speed Small Bearing & Sleeve Remover Tool

Honda 5-Speed Transmission Bearing & Sleeve Remover Tool - Small Size Made in the USA by Superior Transmission Parts The K0110 is designed to safely and easily remove the secondary shaft bearing and oil collar without damaging the bearing, collar or...

Honda 5-Speed Large Bearing & Sleeve Remover Tool

Honda 5-Speed Transmission Bearing & Sleeve Remover Tool - Large Size Made in the USA by Superior Transmission Parts The K0110 is designed to safely and easily remove the secondary shaft bearing and oil collar without damaging the bearing, collar or...

VW 095 096 01M Transmission Pinion Shaft Removal Tool Kit by Adapt-A-Case

VW 095/096/01M Transmission Pinion Shaft Removal Tool Kit Beetle - Jetta - Golf - Passat Made in the USA by Adapt-A-Case Servicing of the pinion shaft seal, cone bearing and race has now been simplified.  The biggest challenge has been to remove the...

JF009E RE0F08A/B Transmission Variator Clamp C by Adapt-A-Case

This is an add-on for the T-VTAC which fits around Subaru and Nissan JF009E and RE0F08A/B variators. Adapt-A-Case Part Number: T-CVTSUBAC

Toyota Transmission MLPS Removal Tool by Superior

Toyota/Lexus AW Series Transmission MLPS Removal Tool Made in the USA by Superior Transmission Parts The new K0125 MLPS puller makes removing a Toyota/Lexus/AW style manual lever position switch (MLPS) a breeze.  Gone are the days of prying the...

ZF8HP Series Transmission Two Piece Ring Set by Adapt-A-Case

ZF8HP Series Transmission Two Piece Ring Set These two rings are used to protect the aluminum drums from cracking when removing the HD snap ring.  These rings are machined to fit the four different diameter drums used int he ZF8HP automatic...

Toyota U140 U240 Series Transmission Specialty Spanner Socket

Toyota U140/U240 Transmission Spanner Socket Works on Lexus RX300, Toyota Rav 4 and Toyota Camry with U140 or U240 Series Transmissions After many requests from transmission rebuilders, Adapt-A-Case is proud to introduce their new dual-purpose socket...

Toyota U660 Transmission Specialty Spanner Socket

Toyota Camry U660 Transmission Spanner Socket  Made in the USA by Adapt-A-Case This tool is necessary to completely disassemble the Toyota U660E automatic transmission.  Hardened and built with Adapt-A-Case engineering, this heavy duty socket...

U340E U341E Output Shaft Nut Special Spanner Socket Tool by Adapt-A-Case

Toyota/Lexus U340E & U341E Output Shaft Nut Specially Spanner Socket Made in the USA by Adapt-A-Case This output shaft nut socket has been engineered by the experts at Adapt-A-Case to make removal of the output shaft nut in U340E/U341E transmission a...