General Motors

6L80 6L90 6L50 5L40 Transmission RingMaster Specialty Snap Ring Pliers

Adapt-A-Case part number: T-6800AC The RingMaster Transmission Snap Ring Pliers Designed GM 5L40 / 6L50 / 6L80 / 6L90 transmissions Made in the USA by Adapt-A-Case The 6L80 ushered in a

The Drum Buddy Spring Compressor by Adapt-A-Case

Adapt-A-Case part number: T-6900AC The Drum Buddy Made in the USA by Adapt-A-Case Works with 4T65E, AX4S, AX4N, 5R110W, 4R100, 4L60E and More! Simple & Effective Bench-Top Spring Compressor<

4L80E 4L85E Turbine Shaft Teflon Seal Resizer

Part number: T-2974 A turbine shaft Teflon seal resizer for GM 4L80E and 4L85E automatic transmissions. It is equivalent to the J-38736 tool, used to resize the Teflon seal on the turbine shaft. Made...

10R80 10L90 CDF Drum Stainless Steel Teflon Ring Resizer | Adapt-A-Case

Part number: T-307780SAC A stainless steel Teflon ring resizer for the CDF drum in the 10R80 and 10L90 automatic transmissions, used by Ford and GM respectively, made in the USA by Adapt-A-Case. It...

700R4 4L60E 4L65E 4L70E Forward Piston Installation Tool | Sonanx

Sonnax part number: 77764-INSTL Sonnax forward piston installation tool for 700R4, 4L60E, 4L65E and 4L70E units. It is used in place of GM Kent-Moore J-29883 on applications that have an input drum...

Bushing Driver Tool Kit for 700R4 & 4L60E All Years

Part number: BDK-700R4/4L60E Bushing Driver Tool Kit for 700R4 & 4L60E All Years This is a high quality bushing driver set made specifically for the 700R4 and 4L60E. This kit comes with all the...

700R4 4L60E Pump Body Bushing Driver

Part number: T700-309 A pump body bushing driver for 700R4 and 4L60E transmissions, fitting the 200, 200C, 200-4R, 325-4L, 700-R4, 4L60 and 4L60E families. Made by Fitzall. A matching driver, part...

8L90 Input Shaft Teflon Ring Resizer Kit | HD Stainless Steel | Adapt-A-Case

Part number: T-50911SAC A stainless steel resizer kit for the Teflon seal rings on the 8L90 input shaft, covering both the large and small ring sizes. It is a 4-piece kit, so all the rings on the...

700R4 4L60E 4L65E 4L70E Rebuild Tool Kit

Part number: 700R4-4L60E-RBTK 700R4 4L60E 4L65E 4L70E Rebuild Tool Kit This tool bundle has the basic specialty tools to help you get your 700R4/4L60E rebuild done properly and efficiently. Save...

4L60E Pump Stator Shaft Installer & Resizer

Part number: T-1503 GM 4L60E Pump Stator Teflon Ring Installer & Resizer Made from stainless steel this tool helps installing the rings for the 4L60E stator shaft for years to come. Just place the...

4L60E Input Drum Turbine Shaft Installer & Resizer

Part number: T-1574 GM 4L60E Input Drum Teflon Ring Installer & Resizer Made from stainless steel this tool helps installing the rings for the 4L60E turbine shaft for years to come. Just place the...

Universal Pulse Dampener Tool Kit

TransGo part number: 6T-PDP-TKC Universal Pulse Dampener Tool Kit (with carbide reamer) eliminates the need to purchase a new valve body casting. Universal fit for General Motors 6-speed FWD units:...

6L80 6L90 1-2-3-4/3-5-Reverse Drum Pressure Checker & Bearing Installer

Adapt-A-Case part number: T-135PRBRAC This multi-functional tool test the pressure of the 6L80 and 6L90 1-2-3-4/3-5 reverse drum to ensure there are no cracks or leaks throughout it. Simply place the...

6L80 6L90 6L50 3-5-Reverse Bearing Installer

Part number: T-135BRGAC An Adapt-A-Case bearing installer for the 3-5-Reverse drum on 6L80, 6L90 and 6L50 transmissions. Place the bearing on the tool, set it on the drum, then tap it into place. It...

Universal GM Rear Wheel Drive Transmission Holding Fixture

Part number: T-48909AC Universal holding fixture for GM rear-wheel-drive transmissions, Adapt-A-Case 48909AC. It requires a 1.5 inch receiver and yoke from the Adapt-A-Case 0156TCAC and does not work...

6L80 6L90 6L50 6L45 Front Seal Bushing Installer

Adapt-A-Case part number: T-LMNOPAC Installing the front seal and bushing on a 6L80/6L45/6L50/6L90 transmission can be tricky and expensive even for the most experienced rebuilder. Adapt-A-Case came...

6L50 Input Shaft Teflon Ring Installer & Resizer Tool

Adapt-A-Case part number: T-48066SAC This is a new heavy duty stainless steel input shaft Teflon ring resizer tool for the 6L50 transmission that was made in the USA by Adapt-A-Case. All you have to...

4T60E 4T65E Turbine Input Shaft Teflon Ring Installer & Resizer Tool

Adapt-A-Case part number: T-34741SAC This input shaft Teflon ring installer tool is made from heavy duty stainless steel in the United States by Adapt-A-Case. It is designed specifically for...

GM Low Reverse Rear Clutch Spring Compressor Tool - HD by Adapt-A-Case

Adapt-A-Case part number: T-0151AC HD Low-Reverse Spring Compressor Tool Made in the USA by Adapt-A-Case This is a heavy duty spring compressor tool intended for daily use when rebuilding the TH350,...

Adapt-A-Case 6L80 & 6L90 Specialty Tool Set

Part number: AACTC6L80 Get all the great Adapt-A-Case specialty tools for GM's 6L80 and 6L90 transmissions in one box and save time and money! Adapt-A-Case is the leader in the design and manufacture...