Snap Rings

4L80E Snap Ring 4th Clutch Pressure Plate Snap Ring/ OD Drum End Snap Ring

Part number: U34861A A snap ring for the 4L80E automatic transmission that retains the pressure plate at the end of the 4th/overdrive drum, also known as the OD drum end snap ring. It is sold...

4L80E Direct Clutch Snap Ring (1990-UP)

Part number: 1304A OEM snap ring for the direct clutch pack in GM 4L80E transmissions, 1990-UP. Like all the OEM parts we sell, it is cleaned and inspected before it ships.

TH400 4L80E MT540 Forward & Direct Clutch Inner Snap Ring | Sonnax | 5-Pack

Sonnax part number: 34577-01 A forward and direct clutch inner snap ring for TH400, 4L80E and MT540 automatic transmissions, and for Allison AT540, AT543 and AT545 transmissions, made by Sonnax. It...

4L80E Main Shaft to Ring Gear Snap Ring

Part number: 1691C A new snap ring for 4L80E automatic transmissions. It holds the main shaft to the ring gear and is sized for that retaining groove in the 4L80E gear train. It is sold individually...

4L80E Direct Clutch Return Spring Retainer Snap Ring

Part number: U34879 A snap ring that holds the direct clutch piston spring retainer in place on GM 4L80E automatic transmissions, the smaller ring in the direct drum. It is a good used part sold...

4L80E Overrun Clutch Retainer Snap Ring (2001-UP)

Part number: 1306A A used overrun clutch retainer snap ring for GM's 4L80E automatic transmissions built 2001-UP, .060 inches thick. It is sold individually as one used snap ring for this...

TH400 4L80E Intermediate Pressure Plate Snap Ring (1982-2009)

Part number: U34873 A used intermediate pressure plate snap ring for GM Turbo 400 (TH400) and 4L80E automatic transmissions built from 1982 on, 0.092 inches thick. It is the snap ring that retains...

TH400 4L80E Center Support to Case Rear Snap Ring (1982-2009)

Part number: D34883 A center support to case rear snap ring for GM Turbo 400 (TH400) and 4L80E automatic transmissions manufactured from 1982 to 2009. It is a new replacement ring for the rear snap...

4L80E Overrun Clutch Retainer Snap Ring (1990-UP)

Part number: 1306 An OEM overrun clutch retainer snap ring for GM 4L80E transmissions built from 1990 and up. It has been cleaned and inspected before sale so it is ready to use in a rebuild, sold as...

4L80E Forward Clutch Piston Snap Ring (1990-UP)

Part number: 1311 A forward clutch piston snap ring for GM's 4L80E transmission built 1990 and up. This is an OEM hard part that has been cleaned and inspected, and is sold individually as a single...

4L80E Intermediate Clutch Spring Retainer Snap Ring (1990-UP)

Part number: 1308 An intermediate clutch spring retainer snap ring for 4L80E transmissions built 1990-UP. It is a cleaned and tested part, sold individually as one snap ring for this application,...

4L80E Direct Clutch Return Spring Snap Ring (1990-UP)

Part number: 1304 A direct clutch return spring snap ring for GM's 4L80E transmission built 1990 and up. This is an OEM hard part that has been cleaned and inspected, and is sold individually as a...