Product Description
Fits: Ford 4.6 / 5.4 / 6.8 / Coyote 5-liter
Modular/Coyote Ford bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® cases. It fits 4.6, 5.4 and 6.8 liter overhead cam engines and the “Coyote” 5-liter V8s.
Specifications
| Engines | Ford 4.6, 5.4 and 6.8 liter overhead cam; Coyote 5-liter V8s |
|---|---|
| Cases | Reid Racing 2-piece Superglide and Super Hydra 400 |
| Material | High-strength aluminum, heat treated |
| Certification | SFI 30.1 |
| Flexplate | 164 tooth |
| Does not fit | Reid Racing S80 4L80E replacement case |
About this bellhousing
Cast from high-strength aluminum and heat treated for added toughness, the bellhousing passes SFI 30.1 certification and is approved with no external shields required.
It has an open bottom for converter access, a reduced diameter for better floorboard clearance and a contoured mounting flange that matches the rear of the engine block. It is designed for a 164 tooth flexplate, with stock-style starters in the factory location.
Notes
Note: This Bellhousing does not fit the Reid Racing S80 4L80E replacement case!
Cast from high-strength aluminum and heat treated for additional toughness, the bellhousing passes the stringent SFI 30.1 certification* and is approved with no external shields required.
There are currently no SFI or Racing Sanctioning Body provisions that require testing for containment of torque converter failures and Reid Racing, Inc.
Reid Racing part number: RR-BH050 Note: This Bellhousing does not fit the Reid Racing S80 4L80E replacement case!
However, meeting SFI specifications is not a guarantee against failure in use ; it means that the products have undergone SFI specified testing on a regular basis and have demonstrated that they meet or exceed the minimum standards as established by SFI Foundation, Inc.
can make no guarantees, warranties, or representations regarding the end result of torque converter failures.
