Hard Parts

A727 A518 A618 Direct Drum Spring Set of 9 (Short)

This is a set of nine used direct drum springs for Dodge/Chrysler/Jeep A727, A518 and A618 automatic transmissions.

48RE Forward Drum w/o Input SFT/DIR Clutch Hub (2003-UP will retro)

A500 A518 Overdrive 6-Clutch Drum (1990-UP)

This is a good used A500/A518 overdrum drum 6-clutch style manufactured from 1990 and up.  Please verify your style matches the 6-clutch style before purchase.

Chrysler A518 46RE 46RH 47RE 47RH 48RE A727Upgraded Band Strut (Sonnax 22900-10)

46RE, 46RH, 47RE, 47RH, 48RE, A727 Band StrutSonnax Part No. 22900-10 .100" Longer than OE After the Low/Reverse brake drum has been resurfaced and the brake band has been relined, the band may not hold during apply,...

A518 A618 47RE 47RH 48RE Heavy Duty Input Shaft

47RE, 47RH, 48RE Heavy Duty Input ShaftPart No. 22121B-01 Designed for hard-working Chrysler A618, 47RH/RE and 48RE units, Sonnax heavy duty input shaft 22121B-01 comes with durability and performance features which are second to none...

A518 A618 47RE 47RH 48RE Extreme Duty Intermediate Shaft - Sonnax

47RE, 47RH, 48RE Extreme Duty Intermediate ShaftPart No. 22171B-HD OE Part No. 4617611 In Dodge 47RE, 47RH and 48RE units, intermediate shaft failure is common as power levels are increased and long-distance towing applications...

A518 A618 48RE A727 Direct Drum - 4-Clutch Style (1971-UP) 4058648

This is a good used direct drum, front clutch drum, for Dodge/Chrysler/Jeep A518, 46RE, A618, 47RE, 47RH, 48RE and A727 model transmissions that use the 4-clutch friction plate style drum.  All our Dodge-Jeep OEM hard parts have been cleaned and...

A500 A518 Overdrive Sun Gear (1995-UP) 15-Deg/Angle Teeth

This is a new aftermarket high quality replacement overdrive OD sun gear for Dodge/Jeep A500/A518 series transmissions manufactured from 1995 and up that uses the 15 degreed with angled teeth style sun gear. 

A500 A518 Overdrive Sun Gear (1989-1994) 22-DEG

Tis is a good used A500 and A518 transmission overdrive sun gear with 22-degree angled teeth for transmissions manufactured from 1989 to 1994.

A518 A618 Intermediate Shaft - Used

A518 Output Shaft

A518 A618 Direct Drum - 4-Clutch Style (1990-UP) 4058648

This is a remanufactured A518 46RE 46RH A618 47RE 47RH 48RE transmission direct front clutch drum.  It is the direct drum style that uses 4-clutches.  OEM Part Number: 4058648 

A518 A618 48RE Reverse Drum w/ Lip (1994-UP) (New)

This is a New reverse drum used on Dodge/Chrysler/Jeep A518 46RE 47RE 46RH 47RH A618 48RE automatic transmissions manufactured from 1994 and up.  The reverse drum is the style with a lip. 

A518|A618||46RE|47RE|A727 Input Shaft w/ Hub (4-Hole Style)

A518 A618 48RE A727 Intermediate Band Power Wedge Anchor by Adapt-A-Case

Chrylser OEM band anchors in A727, A518, A618 (46RE/47RE) and especially heavy-duty 48RE transmissions are a compromise between funcionality and cost.  The OE band anchor's material is brittle.  As the transmission band wears, the angle of the...

Dodge 48RE Diesel 4X4 Transmission Transfer Case HD Support Mount Kit (2003-UP) Adapt-A-Case

Dodge 48RE Transfer Case Support & Mount 2003-UP 4X4 HD Diesel Transmissions 48RE 4WD overdrive housings often crack.  Failure is typically due to the lack of support of the heavy transfer case, which weighs about 80 pounds!  Adapt-A-Case...

Chrysler A904 A727 A518 A618 HD Steel Reverse Servo Pin by Adapt-A-Case

Dodge Jeep A904 A727 A518 A618 Transmission HD Steel Reverse Servo Pin Rear wheel drive Chrysler transmissions have long had durability problems of their soft aluminum reverse servo pins.  OEM pins are susceptible to galling.  The resulting...

Chrysler A518 46RE 46RH 47RE 47RH 48RE A727 Band Strut (Sonnax 22900-15)

Band StrutSonnax Part No. 22900-15 .150" Longer than OE After the low/reverse brake drum has been resurfaced and the brake band has been relined, the band may not hold during apply, causing a slip or no reverse. Sonnax has designed two extended...

A518 46RE A618 47RE 48RE Output Shaft - 4X4 (1996-UP)

This is a high quality OE Dodge/Jeep/Chrysler A518/A618 output shaft used on 4X4 automatic transmissions manufactured from 1996 and up.  All our OEM hard parts have been cleaned and inspected to ensure that the parts you receive will be 100% ready...