Product Description
Build your own rebuild kit for the Getrag G360 manual transmission. One builder covers 2WD (D250/D350) and 4WD (W250/W350): the bearing/seal/synchro kits are common to both. Pick the overhaul kit that matches your case, then add only the parts you need.
Build your own G360 rebuild kit: choose the parts that match the transmission on your bench and leave out what you don't need. This builder has 8 option groups and 17 choices, all optional, so the kit holds only what you pick.
What you can choose
- Choose Your Overhaul Kit: 302002 Gasket & seal kit only (reseal)
- Add Synchro rings: 302701 1st-2nd synchro ring; 404701A Brass synchro ring, 3rd/4th/5th/reverse positions
- Add Synchro assemblies, hubs & sliders: 302703K 3rd-4th synchro assembly (G360-2.5); 302640K Hub and slider kit, G360; 302641 Slider sleeve - G360 3-4 and 5th-reverse; 302703-2K Synchro keys, springs & balls kit (set of 3)
- Add Shift forks: 302841 1st-2nd shift fork (G360-23); 302843 3rd-4th shift fork (G360-23A)
- Add Gears & shafts: 302670 Input shaft, 25-tooth, 1-1/4"-10 spline clutch end; 302674 Cluster (counter) gear WITH 5th gear, 43-33-21-14-48 teeth (G360-8A; includes the 48T counter 5th); 302485 Countershaft
- Add Bearings: 334240 Input shaft pocket needle bearing (internal mainshaft pilot, not the crankshaft/clutch pilot)
- Add Seals, retainer & shims: 302070 Input (front bearing retainer) seal; 302724 Front bearing retainer
- Add Small parts: 302756-4 Top cover pin; 302484 Top cover soft (expansion) plug