Product Description
4R70E, 4R70W, 4R75E, 4R75W, AODE
Common complaints with listed Ford units include delayed lockup, shudder, no lockup or converter codes. When too much oil is routed to this plunger valve, the bypass valve has slow reaction from MCC/TCC solenoid oil. If there is excessive wear at the plunger valve, regulated converter charge oil can leak to exhaust. Because this regulated converter charge oil is always present, either as release or apply pressure, severe leakage at the sleeve can result in TCC slip or no apply condition. Sonnax bypass clutch control plunger valve kit 76948-04K restores hydraulic integrity and will eliminate these problems.
- The single .030" orifice is much smaller than the OE size, allowing the bypass clutch control valve to properly stroke to the TCC apply position.
- This eliminates the need to modify the plunger feed hole in the separator plate, which is a common industry adjustment.
- Highly wear-resistant sleeve and hard-coat anodized plunger valve eliminate converter charge oil loss.
Symptoms
- Shudder
- Code 628
- No lockup
- TCC apply & release concerns
- Delayed lockup
Cause
Too much oil to the bypass control valve plunger, or wear at the control sleeve.
Correction
The smaller orifice in the Sonnax sleeve allows TCC oil to stroke the bypass valve more quickly. The improved plunger and sleeve replace worn components that are leaking converter charge oil to exhaust.
Contents
- Sleeve
- Valve
