Transtar

NP263 Main Shaft - 32 Spline; 49 Pump Spline, To Updating From 38 Spline shaft, you must use the following parts:44716 Mode Snap Ring, 25904 Pump 49 Spline, 25902 Tone Wheel, 35212 Pump Tube & Pump Tube O-Ring AS012, 25502 Filter, 25500 Filter Ruber

Main Shaft; 32 Spline; 49 Pump Spline, To Updating From 38 Spline shaft, you must use the following parts:44716 Mode Snap Ring, 25904 Pump 49 Spline, 25902 Tone Wheel, 35212 Pump Tube & Pump Tube...

NP263 Main Shaft - NON XHD, 32 Spline | 401672

Main Shaft; NON XHD, 32 Spline Transtar Aftermarket part number 401672 for the NP261 / NP263 transfer case. ApplicationsNP261 / NP263

NP263 Mainshaft Kit - 31 Sprine, 49 Pump Splines, With Bearing/Sleeve, 34x37x49x31T, This Part Has Been Updated And Requires Mode Snap Ring Part # 401865 | A401672AK

Mainshaft Kit; 31 Sprine, 49 Pump Splines, With Bearing/Sleeve, 34x37x49x31T, This Part Has Been Updated And Requires Mode Snap Ring Part # 401865 Transtar Aftermarket part number A401672AK for the...

NP263 Mainshaft Kit - 32 Spline, 49 Pump Splines, With Bearing/Sleeve, 34x37x49x32T, When Updating From The 38 Spline Shaft, You Must Use The Following Parts:44716 Mode Snap Ring, 25904 Pump 49 Spline, 25902 Tone Wheel, 5212 Pump Tube & Pump Tube O-R

Mainshaft Kit; 32 Spline, 49 Pump Splines, With Bearing/Sleeve, 34x37x49x32T, When Updating From The 38 Spline Shaft, You Must Use The Following Parts:44716 Mode Snap Ring, 25904 Pump 49 Spline,...

NP263 Pump Assembly - 49 Splines, Uses Brass Seal for Mainshaft | 401500

Pump Assembly; 49 Splines, Uses Brass Seal for Mainshaft Transtar Aftermarket part number 401500 for the NP261 / NP263 transfer case. Applications

NP263 Rear Case - 31 Spline Output Shaft Type, Casting # 25909 **SERVICE TIP; Add Part # 482860 - Rear Main Shaft Bearing Snap Ring** | A401760-2Q

Rear Case; 31 Spline Output Shaft Type, Casting # 25909 **SERVICE TIP; Add Part # 482860 - Rear Main Shaft Bearing Snap Ring** Transtar Aftermarket part number A401760-2Q for the NP261 / NP263...

NP263 Synchronizer - Inner Synchro, Mode, Carbon Lined | 401701-1

Synchronizer; Inner Synchro, Mode, Carbon Lined Transtar Aftermarket part number 401701-1 for the NP261 / NP263 transfer case. ApplicationsN

NP263 Transfer Case Hard Part | 401001A

Transfer Case Hard Part Transtar Aftermarket part number 401001A for the NP261 / NP263 transfer case. ApplicationsNP261 / NP263 was

NP271 Fork Assembly - Range, Increased Surface Area To Fit Wide And Narrow Flange Range Slider, Fork Pads Included | A421849DK

Fork Assembly; Range, Increased Surface Area To Fit Wide And Narrow Flange Range Slider, Fork Pads Included Transtar Aftermarket part number A421849DK for the NP271 / NP273 transfer case.

NP271 Input Shaft - 23 Spline | A421670C

Input Shaft; 23 Spline Transtar Aftermarket part number A421670C for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273 was

NP271 Input Shaft - Input, 31 Spline | 421670A

Input Shaft; Input, 31 Spline Transtar Aftermarket part number 421670A for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273

NP271 Pump Assembly | 421500

Pump Assembly Transtar Aftermarket part number 421500 for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273 was used in:

NP271 Small Parts Kit | 421001

Small Parts Kit Transtar Aftermarket part number 421001 for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273 was used in:

NP271 Switch - 4WD Indicator, 2 Prong | 421410A

Switch; 4WD Indicator, 2 Prong Transtar Aftermarket part number 421410A for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273

NP271 Synchronizer Ring | 421701-1

Synchronizer Ring Transtar Aftermarket part number 421701-1 for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273 was used

NP271 Tube and Filter | 421463

Tube and Filter Transtar Aftermarket part number 421463 for the NP271 / NP273 transfer case. ApplicationsNP271 / NP273 was used in:

NP435 Bearing Retainer - GM Units With 9.13" OAL Input Shaft, 1-1/8 Inner Diameter | 316724C

Bearing Retainer; GM Units With 9.13" OAL Input Shaft, 1-1/8 Inner Diameter Transtar Aftermarket part number 316724C for the NP435 manual transmission. Applications

NP435 Bearing Retainer - Tapper Input Bearing Type | 316724B

Bearing Retainer; Tapper Input Bearing Type Transtar Aftermarket part number 316724B for the NP435 manual transmission. ApplicationsNP435

NP435 Bearing Retainer | 316724A

Bearing Retainer Transtar Aftermarket part number 316724A for the NP435 manual transmission. ApplicationsNP435 was used in:

NP435 Gasket Seal Kit | ATGSK-127F

Gasket Seal Kit Transtar Aftermarket part number ATGSK-127F for the NP435 manual transmission. ApplicationsNP435 was used in: