Chrysler / Dodge / Jeep

A500 A518 A618 A727 A904 Reamer for Oversized 4 Spool Switch Valve

A500 A518 A618 A727 A904 Reamer for Oversized 4 Spool Switch Valve 22771A-13.

948TE E-Clutch Molded Seal Press Tool

What if we told you that we have a solution to those pesky seals on the 948TE transmission? That's right, ATSG made a tool that banishes all your seal worries! Sleep easier at night knowing the 948TE E-Clutch Molded Seal Press won't let you down...and...

6F24 A4CF1/2 A6MF1/2 A6GF1 A6LF1/2/3 Universal Reducing Regulator Repair Tool Kit

Universal Reducing Regulator Repair Tool KitFor use with SK A4CF and SK A6MF  This reamer and guide tool kit is required to oversize the reducing regulator bores when using TransGo SHIFT KIT® Valve Body Repair Kit SK...

CVT Pressure Test Adapter Set by Superior

CVT Pressure Test Adapter Set A must have for any shop rebuilding CVT units!  Made in the USA by Superior Transmission Parts Fits various CVT models with 10mm, 14mm and 22mm test port size, with o-ringed fittings.  These fittings have a...

The Seal Buddy Sub Kit Torque Conveter/Front Seal Installer

ZF8HP Series Transmission Two Piece Ring Set by Adapt-A-Case

ZF8HP Series Transmission Two Piece Ring Set These two rings are used to protect the aluminum drums from cracking when removing the HD snap ring.  These rings are machined to fit the four different diameter drums used int he ZF8HP automatic...

62TE Transmission Compounder Remover Slide Hammer Attachment Tool

Chrysler 62TE Transmission Compounder Remover Slide Hammer Attachment  Made in the USA by Adapt-A-Case The compounder in Chrysler 62TE transmissions can be difficult to remove especially when damaged.  The new Adapt-A-Case tool T-9908AC simply...

NV4500 Transmission 5th Gear Nut Remover & Installer

Dodge/GM 5-Speed NV4500 Transmission 5th Gear Nut Remover & Installer Also Fits 4WD Allison 1000/2000 Series Transmissions Why have two different wrenches to buy and keep track of when you can kill two birds with one wrench?  Here is all you...

42RLE Transmission 4X4 Output Shaft Removal Tool by Adapt-A-Case

Dodge/Jeep 42RLE Transmission 4X4 Output Shaft Removal Tool Made in the USA by Adapt-A-Case When used in the 4WD application, the 42RLE's output shaft is retained to the rear planet with a squared c-clip.  Similar to most front wheel drive axles,...

Dodge 7.25 8.25 9.25 Rear End RWD Differential Carrier Bearing Adjuster by Adapt-A-Case

This transmission tool, by Adapt-A-Case, makes it easy to adjust the ring and pinion on a Dodge 7.25, 8.25, and 9.25 rear end.  Simply use set screws on the tool to lock on to your long extension.  Will work on both sides. Adapt-A-Case Part...

A500 A518 A618 HD Overdrive Spring Compressor by Adapt-A-Case

A500 / A518 / A618 Heavy Duty Overdrive Spring Compressor Dodge - Chrysler - Jeep The T-1302AC is laser cut from 1/4'' steel.  The (3) vertical bars are welded in place using much stronger mortise-and-tenon joints; finished cleanly by machining them...