Product Description
Fits: Dana 60 · Ford
Reid Racing Dana 60 steering knuckle D60001FR, right (passenger's side), for Ford kingpin axles. It is based on the Chevy casting: it accepts factory Ford spindles and one ton Ford brakes, but uses the lower Chevy-style steering arm and Chevy tie rod ends and taper. The matching left (driver's side) knuckle is D60001FL.
Specifications
| Axle | Dana 60 (Ford kingpin) |
|---|---|
| Side | Right (passenger's side) |
| Matching left knuckle | D60001FL |
| Material | High strength ductile iron |
| Brakes | Accepts factory Ford spindles and one ton Ford brakes |
| Steering | Chevy-style steering arm and Chevy tie rod taper |
| Steering arm | 5th bolt hole for high steer arms; 4 bolt arms still fit |
| Tie rod holes | Can be drilled for 3/4 in rod end |
| Finish | Powder coated Orange® |
Features
It is cast from high strength ductile iron, beefed up with extra material and ribbing, and comes fully machined and ready to install. It is 100% interchangeable with a Ford kingpin knuckle except for the Chevy tie rod ends.
A 5th bolt hole takes high steer arms, and 4 bolt arms still fit. The cast-in steering stop eliminates bent stop bolts. The tie rod holes can be drilled to accept a 3/4 in rod end. Left and right knuckles are sold in pairs or individually. Powder coated bright Orange®.
Notes
100% interchangeable with a Ford kingpin knuckle except uses stronger Chevy tie rod ends
There is no warranty on this product.
