Product Description
Fits: Powerglide · 1962-1973
Raybestos Stage-1 high clutch friction plate for the GM Powerglide, 1962-1973. It is .060 in (1.52 mm) thick with a 1-way multi-parallel groove, a 5.06 in OD and 45 teeth, and replaces OE 1373575. Made in USA.
Specifications
| Position | High clutch, Stage-1 (.060 in with groove) |
|---|---|
| OE number | 1373575 |
| Friction material | Stage-1 |
| Thickness | .060 in / 1.52 mm |
| Outside diameter | 5.06 in |
| Groove | 1-Way Multi-Parallel |
| Teeth | 45 |
| Years | 1962-1973 |
| Recommended use | Front-wheel and rear-wheel drive domestic and import street-strip, "tuner" and off-road performance applications |
About Stage-1 frictions
Stage-1 performance frictions are for builds that may not need the capacity of the Gen2 Blue Plate Special but need more than a stock tan or high energy plate can handle. They also suit heavy duty use, adding holding capacity and withstanding the higher temperatures of towing heavy loads. Raybestos lists high horsepower capability, greater torque capacity, maintained piston travel, higher heat resistance and smooth engagements.
Notes
Raybestos Stage-1 Performance frictions are an affordable solution for performance applications that may not require the capacity of the Gen2 Blue Plate Special, but do require a friction plate that can handle the demands that a stock tan or high energy plate cannot.
Images
WARNING : This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
