Product Description
Fits: Honda, Acura 4-Speed, 2-Shaft
Mainshft 2nd Gear assembly
On Honda 4-speed transmissions, the mainshaft 2nd gear wears severely from contact with the 2nd clutch needle roller bearing. This bearing also needs frequent replacement due to wear. The wear on the gear and the bearing is due to the axial thrust load on the assembly. Replace the needle bearing with Sonnax thrust washer 88406-SP or 88406B. These high-quality bronze thrust washers are designed to more readily withstand the wear and axial thrust load of the mainshaft 2nd Gear assembly.
| Sonnax No. | Application | O.D. | Thickness |
|---|---|---|---|
| 88406-SP | AK, AS, F4, L4, CA, PL | 2.028" | .084" |
| 88406B | some G4 | 2.185" | .084" |
- Material: Bronze
- Outer Dia.: 2.185"
- Inner Dia.: 1.427"
- Thickness: 0.083"
Notes
The gear thrust surface must be in good condition. A worn gear will cause failure.
Specs
Symptoms
- 2nd Gear damage
- Frequent roller bearing replacement
Cause
Axial thrust load of hardened needle rollers on softer gear.
Correction
Sonnax high-quality bronze thrust washers are designed to more effectively withstand the wear and axial thrust load of the mainshaft 2nd Gear assembly.
