Product Description
Build your own rebuild kit for the BW T10 / Super T10 manual transmission. Early T10 (iron case; aluminum on 1960-63 Corvette), 9-bolt side cover, 10-spline input, 27-spline output. Pick the overhaul kit that matches your case, then add only the parts you need.
Build your own T10 rebuild kit: choose the parts that match the transmission on your bench and leave out what you don't need. This builder has 5 option groups and 14 choices, all optional, so the kit holds only what you pick.
What you can choose
- Add Synchro rings: 384701 Synchro blocker ring - each
- Add Synchro assemblies, hubs & sliders: 384701K 1-2 synchro assembly; 384703K 3-4 synchro assembly; 384701-2AK Synchro key & spring kit; 304641 Torque-lock slider (notch/groove in bore) - early T10; 384601 1-2 hub; 384603 3-4 hub
- Add Shift forks: 384840 Shift fork, 1-2 or 3-4 (T10-23) - order 2 for both
- Add Seals & gaskets: 384000 Gasket set; 394070 Front input shaft seal (fits all T10/Super T10); 384074 Rear extension seal - small yoke; 384074A Rear extension seal - large yoke
- Add Small parts & bearings: 384001 Small parts kit, 1957-65 (SP10-50); M6307N Input / mainshaft front bearing 6307N (80mm)