Product Description
Build your own rebuild kit for the SM465 / CH465 manual transmission. Iron top cover (8 bolts), 17.28mm-thick input bearing. Pick the overhaul kit that matches your case, then add only the parts you need.
Build your own SM465 rebuild kit: choose the parts that match the transmission on your bench and leave out what you don't need. This builder has 8 option groups and 17 choices, all optional, so the kit holds only what you pick.
What you can choose
- Choose Your Overhaul Kit: BK129WS Overhaul kit WITH synchro rings - bearings, seals, gaskets, rings (most popular; add small parts kit below)
- Add Small parts kit: 354001 Transmission small parts kit - snap rings, washers, needles (SP304-50)
- Add Top cover rebuild: 354001A Top cover small parts kit - roll pins, springs, detent parts
- Add Synchro rings: 354702 2nd gear (1-2) synchro ring - each; 354703 3rd/4th synchro ring - each (need 2)
- Add Synchro assemblies & hubs: 354703K 3-4 synchro assembly (slider, hub, keys/springs, 2 rings) - fixes jumping out of 3rd/4th; 354701-2K 2nd gear synchro key & spring kit; 354703-2K 3-4 synchro key & spring kit; 354601 1-2 hub only
- Add Shift forks: 354841 1-2 shift fork (iron top cover); 354843 3-4 shift fork (iron top cover)
- Add Gears & sliders: 354583K Updated 3rd gear kit with 3-4 slider (recommended over bare 3rd gear); 354582 2nd gear, 35 teeth; 354641 1st-2nd/Reverse sliding gear, 44 teeth (chipped from grinding into 1st/reverse); 354041A 1st gear bushing, 1978-up (Cobra WT304-19B)
- Add Seals & gaskets: 354002 Complete gasket & seal kit (use this OR the gasket-only kit); 354000 Gasket kit only (no seals)