Quality Used Hard Parts

700R4 Extension Housing | 2WD | 2-Through Bolt Mount Style | Used

Part number: 8673554 A good used extension housing for 700R4 automatic transmissions. It is the two-wheel-drive version with a 2-through bolt mount style, pulled from a running unit and inspected...

700R4 Transmission Throttle Valve Detent Lever w/ Hitch Pin Early Style 1982-1986

Part number: U700DE Used 700R4 throttle valve detent lever, early style, for 1982-1986 transmissions. It includes the hitch pin and linkage and is sold in good used condition rather than new or...

700R4 Transmission Throttle Valve Detent Lever w/ Hitch Pin Late Style 1987-1993

Part number: U700DL Used throttle valve detent lever with hitch pin for 700R4 automatic transmissions, late style, 1987-1993. It is sold as a used part, described in good used condition, and per the...

A4LD REAR PLANET | 3-GEAR | 1985-1995

Part number: U56584 A used rear planetary gearset for A4LD automatic transmissions built from 1985 to 1995, the 3-gear version of this planetary, spanning that full model-year range. It is sold as a...

A500 A518 46RE 47RE 48REOverdrive Planet (1988-2010) 5 Gear 15 Degree Cut Gears

Part number: U12580BB A used overdrive planet gear set with 5 gears cut at a 15-degree angle, for A500, A518, 46RE, 47RE and 48RE automatic transmissions built 1988-2010. It has been inspected as a...

A500 A518 46RE 47RE 48REOverdrive Planet (1988-2010) 5-Gear

Part number: U12580B Planet; Overdrive, 5 Gear; 22 Degree Angled Teeth

A500 A518 Overdrive Planet (1988-1993) 4-Gear 22 Degree Angled Teeth

Part number: U12580A Planet; Overdrive, 4 Gear; 22 Degree Angled Teeth

A500 Pump Gear Set (1993-1996) 2-Flats

Part number: U12530C Used pump gear set for Dodge/Jeep A500 automatic transmissions made from 1993-1996. It is the style with 2-flats, supplied in good used condition.

A518 A618 48RE Overdrive Direct Drum | 8-Clutch 12-Lug

Part number: U22551B An overdrive/direct drum with 8 clutches and 12 lugs for A518, A618 and 48RE transmissions. It is manufactured in the United States and sold as a complete drum assembly rather...

A518 Output Shaft Bearing Snap Ring

Part number: U22897 A used snap ring for the output shaft bearing in A518 automatic transmissions, offered as a good used part. It is sold individually and should be inspected before reuse, and is...

A727 A518 A618 48RE Forward Direct Pressure Plate | .285''

Part number: U22146 A used forward/direct pressure plate for A727, A518, A618 and 48RE transmissions, 62-UP, .285 inch thick. It is made in the USA and sold as a used hard part rather than new or...

A727 A518 A618 Forward Rear Clutch Retainer Drum

Part number: U22554 Drum; Forward; Rear Clutch Retainer - USED A727

A904 Output Shaft Bearing

Part number: 4108C A used output shaft bearing for Dodge, Chrysler and Jeep A904 automatic transmissions, 1.15 inch inside diameter and 2.44 inch outside diameter. It is sold individually as a single...

AOD AODE 4R70 4R75 1-2 Accumulator Snap Ring

Part number: U76898E Used 1-2 accumulator snap ring for Ford AOD/AODE/4R70/4R75 series transmissions, the rear-wheel-drive four-speed automatics of the AOD family. It is a used part, not new.

AOD Sun Gear Shell | 36-Tooth 4-3/8'', Magnetic Cast Reverse Drum

Part number: U76624 Used sun gear shell for Ford AOD transmissions, 1980-1990. It has 36 teeth, a 4-3/8" size and is magnetic, and it is the version for the cast reverse drum.

C6 E4OD 4R100 Reverse Clutch Pressure Plate | 18-Tooth | 0.40''

Part number: U36150 A used reverse clutch pressure plate for Ford C6, E4OD and 4R100 transmissions, 18-Tooth, 0.400 inch thick. It is sold as a used part for the reverse clutch pack in these...

C6 E4OD Reverse Clutch Hub (1966-1997) 12-Lug

Part number: U36576 A good used reverse clutch hub with 12-lugs for Ford C6 and E4OD automatic transmissions, covering 1966-1997 production. The hub carries the transmission's reverse clutch discs...

C6 Reverse Clutch Piston Custom Kit

This is a good used reverse clutch piston kit for Ford C6 transmissions made from 1976 to 1997.

C6 Reverse Clutch Piston Early Style 1966-1975 (spring holes in inner piston)

Part number: 36966 A used Early Style reverse clutch piston for Ford C6 automatic transmissions, 1966-1975, with spring holes in the inner piston as used on that early design. It is a good used...

C6 Reverse Clutch Piston Late Style 1976-UP (with no holes for return springs, flat inner piston)

Part number: 36966-Late Good used late-style reverse clutch piston for Ford C6 transmissions, 1976-UP. The late style has no holes for return springs and a flat inner piston.