Product Description
WARNING: SONNAX TEST MANIFOLD KIT CAN PROVE OR DISPROVE INTERNAL MECHANICAL SEALING ABILITY ONLY; IT DOES NOT TEST THE INTEGRITY OF THE ELECTRICAL COIL AND CONTACTS. SEE INSTRUCTIONS FOR DETAILS.
Tooling Required
6R100 6R60 6R75 6R80 6HP19 6HP21 6HP26 6HP32 6HP34 Solenoid Test Manifold Kit
The leading cause of solenoid failure in Ford 6R60, 6R75, 6R80, 6R100, ZF6HP19/26/32 (Gen. 1) and ZF6HP21/28/34 (Gen. 2) units is an inability to maintain an internal mechanical seal, resulting in a multitude of drivability concerns. Since it is not an electrical failure, it can be difficult to evaluate whether a solenoid is the cause of a particular problem.
Sonnax solenoid test manifold kit 95430-VTK allows quick, easy, cost-effective pass/fail verification of the solenoid's internal sealing integrity, taking the guess work out of replacing solenoids.
- Must be used with Sonnax vacuum test stand VACTEST-01K
- Test solenoid sealing reliability with vacuum by inserting solenoid snout into Sonnax test manifold
MANIFOLD USAGE
Ford 6R60, 6R75, 6R80, 6R100 solenoids function very similarly to the the ZF6 Gen. 1 versions (although with a significantly lower failure rate) and can be tested using these manifolds, though the colors differ. See chart below for reference:
| Manifold | ZF6 Solenoid | 6R60 or 6R75 Solenoid | 6R80 or 6R100 Solenoid |
|---|---|---|---|
| Blue | Blue Cap | Black Cap | Black Snout |
| Yellow | Yellow Cap | Brown Cap | Brown Snout (Must be energized to test) |
| Orange | Orange Cap | - | - |
Contents
- Blue Manifold
- Yellow Manifold
- Orange Manifold
