6L80 Stage-1 GPZ Friction Clutch Module (2006-UP) Raybestos

Product Description

Stage-1 friction kit assembled from Raybestos plates for the GM 6L80 (2006-UP), with GPZ 3-5 Reverse and 4-5-6 Z-Paks. It has the same line-up as Raybestos module RCPS-21, and the contents list below is exactly what is in the box. Use it with steel module part number 000615.

Recommended for high-stress and heavy-duty driving, commercial vehicles, and as a fix for 3-5 Reverse and 4-5-6 clutch failures.

Specifications

How it works

Stage-1 frictions in the 1-2-3-4, 2-6 and low/reverse clutches add holding capacity and heat resistance. The Z-Pak is a single-sided GPZ clutch system that carries more torque and heat than OE without coning. Made in USA.

For the Gen2 Blue Plate module, see 1558-GEN2-KIT.

What's included

• 5 x 1st/2nd/3rd/4th clutch, Stage-1 (R600915)
• 5 x 2nd/6th clutch, Stage-1: .070 in thick, 7.874 in OD, 36 teeth (R600920)
• 5 x low/reverse clutch, Stage-1 (R600925)
• 1 x 4-5-6 Z-Pak clutch pack: 1 apply plate steel, 1 reaction plate, 7 single-sided ID spline GPZ, 6 single-sided OD spline GPZ, 1 single-sided OD spline thin GPZ (RZP-006)
• 1 x 3-5 Reverse Z-Pak clutch pack: 1 3-5 reverse steel, 5 ID spline GPZ, 4 OD spline GPZ, 1 DS OD spline GPZ (RZP-005)

Instructions and resources

• Gen2 Blue Plate friction module (1558-GEN2-KIT)
• 4-5-6 Z-Pak clutch pack (RZP-006)
• 3-5 Reverse Z-Pak module (RZP-005)

WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.