Product Description
6L80 6L90 Machined Bell Housing and Stator
This is an OEM machined bell housing and stator for any year 6L80 or 6L90. Machined to us the .708" rotor and slide in kit PK408288. This listing is for just the bell housing and the stator/pump cover. It will not contain the slide, rotor, vanes, or any of the other components that go in the pump pocket. The bell housing has 2 peak bolts so it will work with all 6L80's and 6L90's accept corvettes. The stator/cover may or may not include a boost valve and pressure regulator valve. These are almost always worn out in a 6L80 or 6L90 pump anyway so it is always advised to replace these valves. See below for links to replacement options for these valves. The pump cover/stator will include all other valves. The bushings will be used bushings that were installed in the pump originally so it would be a good idea to replace them. You will need to remove all your old pump components and install them in this pump or buy new. If you need all the other components as well to put together a good pump for your build you may be better off looking at our 2 other options for these units: P104500BK (if you can assemble the pump yourself) or P104500BK-RTI (if you want to take it out of the box and install it in your transmission knowing you have a complete and heavy duty pump).
Components Not Included:
- Boost Valve Options- 6L8-Boost-OES STP-STL018 6L80-LB1 104520-01K
- Pressure Regulator Valve Options- STP-STL012 6L80E-PR 104520-14K 6L80-PR-OS
- Rotor Options- PK408288 620817(Billet)
- Vanes- 76742
- Rotor Guide- 33025
- Rings- 6L80-PKH
- Slide- 24224132
- Slide Pin- 104553-03K
- Slide Spring- Included in some of the kits above or individually #104534-HD
- Seal Kit- Included in overhaul kits or #PK6L8090-KIT
- Bushings- 104034 104036A 104037A
- Test Port Plug- 8654382
- Vent Tube- 24231684
- Converter Seal Snap Ring- 24218963
