Product Description
R600920 Stage-1 friction clutch plate for the 2nd and 6th clutch in GM 6L80 and 6L90 transmissions, 2006-on. It is .070 in (1.78 mm) thick with a 7.874 in outside diameter, 36 teeth and a radial groove, and is made in the USA.
Specifications
| Fits | 6L80 |
|---|---|
| Years | 2006-up |
| Part number | R600920 |
| OE number | 24233939 |
| Clutch position | 2nd, 6th |
| Friction material | Stage-1 |
| Thickness | .070 in / 1.78 mm |
| Outside diameter | 7.874 in |
| Groove | Radial |
| Teeth | 36 |
| Recommended use | Front-wheel and rear-wheel drive domestic and import street-strip, tuner and off-road performance applications |
| Origin | Made in the USA |
About Stage-1 frictions
Stage-1 performance frictions are made for performance and heavy duty applications that need more holding capacity than a stock tan or high energy plate, without the capacity of the Gen2 Blue Plate Special. They handle higher horsepower and torque, higher temperatures such as those from towing heavy loads, and maintain piston travel. Typical uses are street rods, tuner cars and mild street-strip applications.
Notes
Raybestos Stage-1 Performance frictions are an affordable solution for performance applications that may not require the capacity of the Gen2 Blue Plate Special, but do require a friction plate that can handle the demands that a stock tan or high energy plate cannot.
WARNING : This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
