Product Description
FITS UNITS WITH 0.991'' (25.17mm) DIAMETER SHAFTS ONLY
6HP26 6HP28 Sun Gear Shaft Bushing
USE OF AN ARBOR PRESS IS REQUIRED FOR CORRECT INSTALLATION. DO NOT USE A HYDRAULIC PRESS OR BUSHING DRIVER/HAMMER COMBINATION TO INSTALL, AS DOING SO WILL DISTORT THE BUSHING AND CAUSE FITMENT ISSUES
The OE sun gear shaft bushings located at front and rear of the sun gear shaft in ZF6HP26 and ZF6HP28 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and burnt B clutches. Sonnax sun gear shaft bushing 95030-06A features superior wear characteristics, eliminating premature deterioration for worry-free operation. The Sonnax bushing's upgraded material composition outperforms the OE bushing.
Symptoms
- B Clutch burned
- Bushing wear
- Bushing failure
- Ratio codes
Cause
OE bushing material composition allows premature wear.
Correction
Install improved Sonnax sun gear shaft bushings to restore critical clearances and resist untimely wear.
Contents
- Bushing (6)
Specifications
- Bushing Style: Precision
- Material: Bimetal
- Housing Bore: 1.103"
- Width: 0.394"
- Shaft Dia.: 0.991"
