Product Description
Fits: 5R110W
The control sleeve assembly opposes TCC solenoid pressure to modulate apply and release of the torque converter clutch. As the sleeve wears, the solenoid will push the valve quickly, causing premature lockup, loss of power and bumpy/cycling apply. The oil reacting on the valve within the sleeve is regulated converter apply oil. If the sleeve is extremely worn, apply oil pressure is reduced as it leaks at the sleeve. When the sleeve wears and causes the valve to hang, the TCC will not apply with required pressure, and overheating or slippage occurs. Sonnax TCC control plunger valve kit 36940-01K restores hydraulic integrity of the assembly.
- Sleeve is manufactured from highly wear-resistant aluminum alloy
- Hardcoat anodized aluminum combats premature wear
Symptoms
- Overheating
- Excess TCC slip
- TCC cycling
- TCC slip
- Code 1783
- Code P0741
Cause
Wear at the TCC control sleeve.
Correction
The Sonnax aluminum alloy sleeve and hard-anodized valve will restore proper hydraulic clearances and prevent premature wear.
Contents
- Plunger Valve
- Sleeve
