Product Description
4T65E 2-3 Accumulator Valve Kit
FITS GM UNITS ONLY. NOT FOR USE IN VOLVO APPLICATIONS
No tooling required
To help control the 3rd clutch apply pressure and shift feel in GM 4T65-E units, a 2-3 accumulator piston and an accumulator valve and sleeve that regulate fluid pressure are used. The 2-3 accumulator valve and sleeve regulate line pressure using torque signal influence and direct 2-3 accumulator pressure to the spring side of the piston, controlling the 3rd clutch apply. Wear at the sleeve or valve can allow torque signal, 2-3 accumulator or line pressures to exhaust, resulting in various 2-3 shift complaints. Some early OE valves were not anodized and are prone to significant wear and scratching.
Sonnax 2-3 accumulator valve kit 84754-53K is made to the late OE size ratio for increased torque signal influence and can be used in early valve bodies as well. Upgraded materials and design have been incorporated to prevent wear.
- Sleeve made from highly wear-resistant billet aluminum
- Hardcoat anodized aluminum valve combats premature wear
- Late OE size ratio used for increased torque signal influence
- Can be used in either early or late OE valve bodies
- Drop-in Zip Valve™ parts install quickly and easily
Symptoms
- 2-3 Shift concerns
- Burnt clutches
Cause
Wear of the 2-3 accumulator valve and/or sleeve allow loss of torque signal, 2-3 accumulator and/or line pressure.
Correction
Install Sonnax 2-3 accumulator drop-in valve kit with upgraded materials to restore correct hydraulic clearances and prevent wear.
Contents
- Valve
- Sleeve
