OEM

4L60E Pump Body Bolt (1993-UP)

Part number: 1141 An OEM pump body bolt for GM 4L60E transmissions built 1993-UP, made in the USA. It is sold individually as this one bolt for the pump body, part of the hardware and fastener parts...

4L60E Pump Seal Retainer

Part number: 1162 A pump seal retainer for GM 4L60E automatic transmissions, sold as a single retainer rather than with the pump seal or gasket included. It carries manufacturer reference number...

4L60E Pump Thrust Washer

Part number: 1163A Pump thrust washer for 4L60E automatic transmissions, also listed for 700R4 and 4L65E applications, made as an OEM part. It sits between the pump and the drum, per the purchase...

4L60E Pump to Case Bolt, 58.5mm Long (1993-UP)

Part number: 1144 A pump-to-case bolt for 4L60E automatic transmissions built from 1993 on, 58.5mm long with a 13mm head. It is sold individually as a single replacement bolt for this position,...

4L60E Rear Planet to Ring Gear Torrington Bearing

Part number: 1157 An OEM 4L60E transmission rear planet to ring gear Torrington bearing. All of our GM hard parts and hardware have been cleaned and inspected prior to sale. It measures 2.07" ID and...

4L60E Reverse Input Piston Retainer Spring

Part number: 1064 An OEM reverse input piston retainer spring for 4L60E transmissions, cleaned and inspected for reuse. It is manufactured in the United States and sold as a single retainer with...

4L60E Reverse Input Piston Snap Ring

Part number: 1065 A reverse input piston snap ring for GM 4L60E automatic transmissions. It is sold as a single snap ring, an OEM-style hardware item rather than a full piston and ring set, for shops...

4L60E Shifter Cable Bracket Bolt

Part number: 1148 Shifter cable bracket bolt for 4L60E automatic transmissions built 1993-UP. It secures the shifter cable bracket to the transmission case and is sold as a single replacement bolt...

4L60E Spacer Plate Bracket

Part number: 1029 A valve body spacer plate bracket for 4L60E automatic transmissions, model years 1993-UP, sold as a single replacement bracket for that particular transmission. It's an OEM hardware...

4L60E Stator to Input Drum Torrington Bearing(USED)

Part number: 1160 A used Torrington bearing for the stator-to-input-drum position in GM's 4L60E automatic transmission. It is a cleaned, inspected take-off part carrying industry part number 74229,...

4L60E Tail Housing Bolt, 33mm Long

Part number: 1147 A tail housing bolt for 4L60E transmissions built 1993-UP, measuring 33mm long with a 15mm head. It is sold individually as a single bolt for this application, matching the size...

4L60E TCC Solenoid Bolt (1993-UP)

Part number: 1139 A TCC solenoid bolt for a GM 4L60E automatic transmission, covering 1993-UP. It has a 10mm Head Width, sold individually as the TCC solenoid bolt for that application, rather than...

4L60E Transmission Case (2 Piece) 24235492 (2007-2008 Hummer, Colorado, Canyon)

Part number: 24235492 Used two-piece 4L60E transmission case, cleaned and inspected, for 2007-2008 Chevrolet and GM Hummer, Colorado and Canyon applications. It carries casting number 24235492.

4L60E Transmission Case (24207965) 2-Piece/Bolt-On Bell Style Housing

Part number: 24207965 This is a used OEM transmission two piece case for GM's 4L60E. It's casting number is 24207965. It has been cleaned and inspected to ensure that it is free from all cracks...

4L60E Transmission Case - GIRAFFE Style (24220974)

Part number: 24220974(GIRAFFE) A two-piece 4L60E transmission case, casting number 24220974, with a small steel cooler line fitting. This casting has two case variants that look alike, identified by...

4L60E Transmission Case - HIPPO Style 2005-2008 (24220974)

Part number: 24220974(HIPPO) A two-piece transmission case for GM's 4L60E automatic transmission, covering 2005-2008 model years, cast with a small steel cooler line fitting. This casting comes in...

4L60E Transmission Case Casting # 24202520

A GM 4L60E automatic transmission case, identified by casting number 24202520 stamped into the housing. It is made in the US.This case is sold as a standalone housing, without the internal components...

4L60E Valve Body Bolt, 47.55 LG (1993-UP)

Part number: 1133 Valve body bolt for 4L60E automatic transmissions built 1993-UP, 47.5mm long with a 10mm hex head. It secures the valve body to the case and is sold as a single replacement bolt...

4L60E Valve Body Bolt, 54.4mm Long (1993-UP)

Part number: 1138 A valve body bolt for 4L60E automatic transmissions manufactured from 1993 and up. This OEM hardware piece is 54.4mm long and has an 8mm head width, matching the dimensions given...

4L60E Valve Body Plug

Part number: 1150 A valve body plug for GM 4L60E automatic transmissions. It is an OEM plug sold individually for the 4L60E valve body, with no separate OEM cross-reference number listed beyond the...