OEM

4L60E Manual Shaft Retainer

Part number: 1154 Manual shaft retainer, a replacement part for the 4L60E automatic transmission. It's sold as a genuine, original-equipment part rather than an aftermarket copy. Sold as a used,...

4L60E Manual Shaft Spacer Clip

Part number: 1402 Manual shaft spacer clip for the GM 4L60E automatic transmission, an original-equipment (OEM) part. It is a hardware item for the 4L60E manual shaft.

4L60E Manual Valve (1993-1995)

Part number: 1179 A manual valve for GM's 4L60E automatic transmission, an OEM part covering the 1993-1995 model years. It is sold as a single valve, the component in the valve body that the...

4L60E Manual Valve (1996-UP)

Part number: 1152 An OEM manual valve for GM's 4L60E automatic transmission, built 1996 and later. It is the valve in the valve body that the shift-lever linkage moves to select a gear range. The...

4L60E Manual Valve Linkage

Part number: 1105 A manual valve linkage for GM 4L60E automatic transmission valve bodies, offered as an OEM part for this application. It matches the linkage used on 4L60E valve bodies as equipped...

4L60E Master Valve Body OEM Bolt Set (1993-UP)

Part number: 1219-KIT A master valve body bolt set for 4L60E transmissions built 1993-UP, containing 20 bolts for the valve body assembly area. Each bolt is a cleaned, inspected used part, sold as...

4L60E Molded Rubber 4th Clutch Piston (1997-UP)

Part number: 1054N A new molded rubber 4th clutch piston for GM's 4L60E automatic transmission, covering models built 1997 and up. This piston applies the fourth-gear clutch pack in the transmission...

4L60E Molded Rubber Forward Clutch Piston (1997-UP)

Part number: 1051N A new molded rubber forward clutch piston for 4L60E automatic transmissions built 1997 and up. It carries manufacturer number 77764A, is made in Taiwan, and covers 4L60-E...

4L60E Molded Rubber Overrun Clutch Piston (1997-UP)

Part number: 1055N A molded rubber overrun clutch piston for the GM 4L60E automatic transmission built 1997 and up. The piston is the molded-rubber style overrun clutch piston used in this...

4L60E Oil Pan - Deep Style (1997-UP) Used

Part number: 1651 A used deep-style oil pan for GM 4L60E automatic transmissions, the deep-pan version that became standard equipment in late 1997 and afterward. Each pan is cleaned and inspected...

4L60E Output Shaft, 2WD, 4.5'' Splines, 18.5'' Long

Part number: 1062 A used 4L60E output shaft for 2WD applications, 18.5'' long with 4.5'' splines and a speed sensor pickup ring. It is made in the USA and sold individually as a single good used...

4L60E Output Shaft, 2WD, 4.5'' Splines, 18.5'' Long w/ Shield

Part number: 1063 A 4L60E output shaft for 2WD applications, 4.5 inch splines, 18.5 inch long, with the shield, cleaned and inspected before sale. It is sized specifically for 2-wheel applications on...

4L60E Output Shaft, 4X4, 27-Spline, 13.25'' Long

Part number: 1070 A cleaned and inspected 4L60E output shaft, 4X4, 27-spline, 13.25 inches long. It has been prepared for reuse in a transmission rebuild after inspection, replacing a worn, cracked,...

4L60E Overdrive Clutch Release Spring

Part number: 1108 An overdrive clutch release spring for GM 700R4 and 4L60E automatic transmissions, sold individually. Five of these springs are used per transmission. These springs are sold...

4L60E Parking Actuator Rod

Part number: 1181 OEM parking actuator rod for 4L60E automatic transmissions. This rod has been cleaned and inspected prior to sale so it is ready to install in a rebuild, restoring the factory park...

4L60E Parking Pawl Assembly (1993-UP)

Part number: 1272 A parking pawl assembly for the GM 4L60E automatic transmission, built 1993 and up. The kit includes the parking pawl, a bracket bolt, a 5'' long manual shaft (the 1996-UP version),...

4L60E Parking Pawl Bracket/Detent Roller Bolt (1993-UP)

Part number: 1136 OEM bolt for the parking pawl bracket and detent roller on the GM 4L60E automatic transmission, 1993-UP. The same bolt serves both the parking pawl bracket and the detent roller,...

4L60E Parking Pawl Rooster Comb

Part number: 1072 A parking pawl rooster comb bracket for 4L60E automatic transmissions, cleaned and inspected before resale. It engages the parking pawl to lock the output gear when the transmission...

4L60E Parking Rod Bracket

Part number: 1039 A parking rod bracket for GM 4L60E automatic transmissions. Hardware is not included with this bracket, and it is sold individually with no separate OEM cross-reference listed for...

4L60E Pressure Manifold Switch/1-2 Accumulator Housing, 65mm LG

Part number: 1135 A bolt for the pressure manifold switch and 1-2 accumulator housing on GM's 4L60E automatic transmission, built 1993 and up. It measures 65mm long with a 10mm head, the size...