Ford

6R80 6R140 Transmission RingMaster Specialty Snap Ring Pliers Kit

Made in the USA by Adapt-A-Case This tool Kit contains the Ringmaster extra long Heavy Duty Specialty Snap Ring Pliers(T-6800AC) and the 6R80 6R140 Snap Ring Plier Tips(T-6RTIPAC) to make the pliers work with the 6R80 and 6R140 Transmissions. 

Custom 5R110W Master Tool Kit

The Drum Buddy Spring Compressor by Adapt-A-Case

The Drum Buddy Made in the USA by Adapt-A-Case Works with 4T65E, AX4S, AX4N, 5R110W, 4R100, 4L60E and More! Simple & Effective Bench-Top Spring Compressor Have you ever tried a foot-press to compress the return spring retainer on a 4T65E...

6R80 6R140 Snap Ring Plier Tips (Works w/ T-6800AC)

These tips convert Adapt-A-Cases current HD transmission Ringmaster snap ring pliers (T-6800AC) to work in Ford's 6R80 and 6R140 rebuilds.

Ford 5R110W Pump Alignment Tool by Adapt-A-Case

Ford 5R110W Transmission Pump Alignment Tool Made in the USA by Adapt-A-Case Adapt-A-Case has made a tool to make the stubborn 5R110W transmission pump easier to align.  It coordinates the pump bushing to the stator bushing, and comes equipped withi...

5R110W Pump Alignment Tool by TransGo

Fits FORD 5R110W 2003-Up Includes proper tools to align pump properly and Tech data to assist in reducing Pump failure, a must on this unit!Addresses: Severe Damage from Misaligned Pump Installation recommendation: Experienced technician Transmission...

5R110W Superior STL008 Bushing Installer Shim by Adapt-A-Case

This is an add-on for the T-9009AC tool that fits the Superior 5R110W bushing (STL008 not included).  For those tha already have the T-9009AC and using the Superior Transmission Parts brand bushing.  Place the T-SUP9009AC on the existing tool...

4F27E Transfer Drive Gear Spanner Socket

This is a new heavy duty transfer drive gear spanner socket for Ford's 4F27E automatic transmissions.  Made in the USA by Adapt-A-Case this tool is made to last after years of use. Adapt-A-Case Part Number: T-1380AC

CVT Pressure Test Adapter Set by Superior

CVT Pressure Test Adapter Set A must have for any shop rebuilding CVT units!  Made in the USA by Superior Transmission Parts Fits various CVT models with 10mm, 14mm and 22mm test port size, with o-ringed fittings.  These fittings have a...

GM 6T70/75 Ford 6F50/55 DETERMINATOR Plate by Superior (K0141)

GM 6T70/6T75 & Ford 6F50/6F55 Transmission Determinator Plate Made in the USA by Superior Transmission Parts The DETERMINATOR Plate, K0141, allows in car testing of main case to determine integrity of clutch packs/rings/sealing areas and isolate a...

The Seal Buddy Sub Kit Torque Conveter/Front Seal Installer

Ford Nissan JF011 JF015 Safely Opens Variators Tool

This made in the USA Adapt-A-Case tool allows the movement of variators to allow the removal of drive belts.  This tool has many slots and holes to fit future needs.  AT this time there are 2 clamp sizes (A & B) that fit three different...

Ford GM Chrysler Transmission Torque Converter & Axle Seal Driving Set

***May 2019 --- This item has been discontinued by Adapt-A-Case***   The Seal Buddy, made in the USA, by Adapt-A-Case, is the best transmission torque converter and axle seal driving set on the market.  Adapt-A-Case developed this 10-piece...

Ford 6R140 Turbine Shaft Input Assembly Handler by Adapt-A-Case

The Ford 6R140 input assembly weighs around 75 pounds and is 28 inches tall.  So for safe installation, Adapt-A-Case has come up with this ingenious tool.  Just place the shaft through the bracket, slide in clip and then tighten eyelet to lock...

Ford 6R140 Stator Support Teflon Ring Installer & Resizer by Adapt-A-Case

This is a high quality stainless steel Ford 6R140 Stator Support Teflon Ring Installer and Resizer tool made in the USA by Adapt-A-Case.  This tool installs the rings for the 6R140 Stator Support for years to come.  Just place the rings on the...

Ford DPS6 Transmission Input Seal Remover & Installer by Adapt-A-Case

Ford DPS6 Transmission Input Seal Remover & Installer Tool Made in the USA by Adapt-A-Case This tool kit is for the removal and installation of both the inner and outer input seals on the Ford PowerShift DS6 transmission. Adapt-A-Case Part Number:...

5R110W Transmission Output Shaft Nut Spanner Socket by Adapt-A-Case

Ford 5R110W Transmission Output Shaft Nut Spanner Socket  Made in the USA by Adapt-A-Case The 5R110W Torqshift transmission, when used in 4-wheel drive applications must make use of a large spanner nut that also serves as the inner surface for the...

6T70/75 6F50/55 Transmission Undercar Jack Arm Support by Adapt-A-Case

Undercar Transmission Jack Support Made in the USA by Adapt-A-Case GM 6T70/6T75  Ford 6F50/6F55 Safely Support Transmissions on Your Jack These are awkward units when removing them from your vehicle.  The Adapt-A-Case Undercar Jack Support...

PTO Bench Mount Adapter 1-3/8'' by Adapt-A-Case

PTO Bench Mount Adapter w/ 1-3/8'' Diameter Shaft Fits Allison LCT1000 & Most Transmissions w/ PTOs Many standard transmissions, transfer cases and hefty duty units like the Allison LCT and Ford 5R110W offer PTO capabilities.  Most of these...