NP246

NP230 240 Series Transfer Case Split Ring Retainer | Sonnax | 1.180'' Shaft

New Process 230 & 240 Series Transfer Case Split Ring Retainer for Shafts with 1.180'' Diameter Sonnax Part Number: 100420-01K NO TOOLING REQUIRED Sonnax offers split ring retainer 100420-01K as an upgrade to the OE open-end style retainer that...

NP230 NP240 Transfer Case Split Ring Retainer | Sonnax | 1.375'' Shaft

New Process 230 & 240 Series Transfer Case Split Ring Retainer Sonnax Part Number: 100420-02K NO TOOLING REQUIRED Sonnax offers split ring retainer 100420-02K as an upgrade to the OE open-end style retainer that commonly breaks. The OE snap ring...

NP136 NP149 NP236 NP246 NP261 NP263 Transfer Case Pump Plate Kit | Sonanx

New Process 230 & 240 Series Transfer Case Pump Plate Kit Sonnax Part Number: 100246-02K NO TOOLING REQUIRED Accelerated wear of magnesium transfer case housings has been documented anytime internal parts move against the magnesium. This is...

NP230 NP240 NP136 Series Case Saver Anti-Wear Plate | Sonnax

New Process 230 & 240 Series Case Saver Anti-Wear Plate WARNING: IF THE CASE IS WORN THROUGH, IT WILL HAVE TO BE WELDED WITH SPECIALIZED MAGNESIUM WELDING Sonnax Part Number: 100246-01 NO TOOLING REQUIRED GM uses a wear plate to prevent the pump from...

NP246 Rear Output Shaft Center Bearing

This is a high quality new replacement rear output shaft bearing for New Process NP246 transfer cases. 57mm OD x 50mm ID x 19mm High

NP246 NP261 NP263 Rear Case (2001-2007) #30605

Rear Case; 32 Spline Output Shaft Type, Non XHD, Casting # 30605, Magnesium Includes Sensor Plug (part # 401483) Allows Case To Fit Multiple Applications

NP246 NP261 NP236 NP136 Transfer Case Pump Assembly (1993-2010) 38-Spline

  This is a new aftermarket replacement pump assembly for New Process NP246 NP261 NP236 NP136 transfer cases.  38-SPLINE This Assembly Has Been Used in the Following Applications: AX15 1993 - 1994 T56 2004 -...