Steel Plates

4L60E 4L65E 4L70E 3-4 Clutch Steel Plate (2001-UP) 0.095''

Teeth 20 Waved/Flat Flat Thickness (Inches) .095 Thickness (mm) 2.41 ID (Inches) 4.995 ID (mm) 126.87 NameYears 4L65-E 2001 - 2007 4L70-E 2006 -...

4L60E Overrun Clutch Steel (1993-UP)

GM 4L60E Overrun Clutch Steel Each 4L60E transmission takes 2 reverse input clutch steels.

4L80E 4th Clutch Steel - Non-Turbulated (1991-UP) 8661579

This is a new non-turbulated steel plate for 4L80E transmission 4th clutch plack.  Used on 4L80E manufactured from 1991 and up. 0.099 / 2.51'' Thick 8-Tooth 6.30'' ID 4-Used in typical 4L80E...

4L80E Direct Steel Plate (1991-UP)

THIS IS NOW LISTED HERE.   This is a new replacement direct clutch steel plate for 1991 and up 4L80E transmissions manufactured from 1991 and up.  There are five of these used per...

4L80E High Performance Steel Module (1990-UP)

 This is a new set of high quality metal steel plates used on 4L80E automatic transmissions.

4L80E Intermediate Clutch HD Kolene Coated Steel Plate .076" Thick

21-Tooth | 4.585'' | .076" Thick | Kolene Coated HD Steel Plate

4L80E Intermediate Clutch Steel Plate - 0.078'' (1990-UP) 8675522

This is a single 4L80E transmission intermediate clutch metal steel plate used from 1990 and up. Thickness = 0.078''/1.98mm ID = 4.997'' 4 are used per transmission OEM Part Number: 8675522

4L80E Overdrive Clutch HD Kolene Coated Steel Plate

8-Tooth | 6.3'' | Kolene Coated HD Steel Plate

4L80E Overrun Clutch HD Kolene Coated Steel Plate

14-Tooth | 4.520'' | Kolene Coated HD Steel Plate

4L80E Overrun Clutch Steel Plate (1991-UP) 8661569

This is a new made in the USA overrun clutch steel plate for GM's 4L80E automatic transmissions manufactured from 1991 and up. 0.099 / 2.51'' Thick 4.539'' ID 3 Used in typical 4L80E Rebuild OEM Part...

4L80E Performance KOLENE® Steel Module (1991-UP)

4L80E Performance Kolene Coated Steel Module(Module may be Raybestos or Alto depending on availability). Kolene® plates are higher heat resistant and offer increased lubricity. Kolene® is a...

4R100 Kolene Coated Steel Plate Module (1997-UP)

High Performance Ford 4R100 Steel Plate Module 1997-UP Made in the USA by Raybestos Powertrain   ABOUT Kolene® Steel Raybestos Powertrain Kolene® 4R100 steel clutch plates are high...

4R100 Steel Module (1997-UP)

FORD 4R100 TRANSMISSION STEEL PLATE MODULE   High Performance Parts for Your Heavy Duty Ford Truck

4R70 4R75 Direct Clutch Steel Plate (1996-UP) 0.079''

4R70E, 4R70W, 4R75W DIRECT (GROB .079") STEEL CLUTCH PLATE 1996-ON OEM Part Number: F6AZ-7B442-AA Clutch Position: Direct (Grob) Material: Standard Steel Thickness: 0.079'' / 2...

4T40E 4T45E 2nd Clutch Steel Plate

Steel, 4T40E/4T45E, 2nd Clutch; .089" Thick, 8 Teeth, 4.793" Inner Diameter (1995-2011) x3 req

4T40E 4T45E Coast Clutch Steel Plate

Steel, 4T40/4T45E, Coast; .069" Thick, 12 Teeth, 2.442" Inner Diameter(1995-2011) x4 req

4T40E 4T45E Direct Clutch Steel Plate

Steel, 4T40/4T45E, Direct, Internal Teeth; .074" Thick, 16 Teeth, 4.965" Outer Diameter (1995-2011) x6 req

4T40E 4T45E Forward Clutch Steel Plate

Steel, 4T40/4T45E, Forward; .069" Thick, 30 Teeth, 4.075" Inner Diameter(1995-2011) x7 req

4T40E 4T45E Reverse Clutch Steel Plate

Steel, 4T40/4T45E, Reverse; .088" Thick, 30 Teeth, 3.995" Inner Diameter(1995-2011) x3 req

4T65E 2nd Clutch Steel Plate

This is a high quality replacement steel plate for GM's 4T65E automatic transmissions manufactured from 1997 and up. 0.068'' Thick 36-Teeth Brands: Alto, Raybestos