Aftermarket

4L60E 4L65E 4L70E Oil Filter | All Plastic Shallow Design | 24200796

Part number: A74010EBFits: 4L60E, 4L65E, 4L70E All-plastic oil filter of the shallow pan design for 4L60E, 4L65E and 4L70E transmissions. It is not used in Corvettes. OEM number 24200796.

4L60E 700R4 200-4R Pump Pivot Pin Spring

Part number: A54540B A pump pivot pin spring for GM 200-4R, 700R4, 4L60E, 5L40E and 5L50E automatic transmissions built 1981 to 2014, made in the US. It carries manufacturer number 8634098, sold...

4L60E 700R4 TH350 Sun Shell Rear Thrust Washer (1969-UP) 8642331

Part number: 44244AFits: 4L60E, 700R4, TH350 · 1969-up A sun shell rear thrust washer for GM's 4L60E, 700R4 and TH350 transmissions built from 1969 and up. OEM part number 8642331, manufacturer part...

4L60E 700R4 TH350 TH250 Rear Shim (0.010'') #1

Part number: 44255Fits: 4L60E, 700R4, TH350, TH250 THM350

4L60E C-Clip for Boost Valve

Part number: 1140CFits: 4L60E A used OEM C-clip for the boost valve in GM 4L60E transmissions, made in the USA. It is sold individually as this one retaining clip for the boost valve, in good used...

4L60E Convertor Clutch Valve, PWM

Part number: 1187Fits: 4L60E OEM converter clutch valve for GM 4L60E transmission pumps. It is the PWM version of the converter clutch valve and is original GM equipment.

4L60E Extension Housing, 4WD, 15963698

Part number: 1068Fits: 4L60E An extension housing for 4L60E transmissions, 4WD configuration, casting number 15963698. It uses a 4 inch seal gasket, mounts to a 5-bolt transmission with a 6-bolt...

4L60E Input Drum Turbine Shaft Installer & Resizer

Part number: T-1574Fits: 4L60E Stainless steel tool for installing and resizing the Teflon rings on the GM 4L60E input drum turbine shaft.

4L60E Molded Rubber 4th Clutch Piston (1997-UP)

Part number: 1054NFits: 4L60E · 1997-up A new molded rubber 4th clutch piston for GM's 4L60E automatic transmission, covering models built 1997 and up. This piston applies the fourth-gear clutch pack...

4L60E Molded Rubber Forward Clutch Piston (1997-UP)

Part number: 1051NFits: 4L60E · 1997-up A new molded rubber forward clutch piston for 4L60E automatic transmissions built 1997 and up. It carries manufacturer number 77764A, is made in Taiwan, and...

4L60E Molded Rubber Overrun Clutch Piston (1997-UP)

Part number: 1055NFits: 4L60E · 1982-up A molded rubber overrun clutch piston for the GM 4L60E automatic transmission built 1997 and up. The piston is the molded-rubber style overrun clutch piston...

4L60E Oil Filter w/ Seal - Deep Pan (1997-UP) 2-Piece Design

Part number: 1021Fits: 4L60E · 1997-up A deep-pan oil filter with seal for GM's 4L60E automatic transmission, built 1997 and up. It uses an OE-style, two-piece metal-and-plastic construction and...

4L60E Overdrive Clutch Release Spring

Part number: 1108Fits: 4L60E An overdrive clutch release spring for GM 700R4 and 4L60E automatic transmissions, sold individually. Five of these springs are used per transmission. These springs are...

4L60E Pump Hard Parts Kit | 10-Vane

Part number: PK4L60E-HPEFits: 4L60E A pump hard parts kit for rebuilding the 4L60E/4L65E/4L70E pump, built around the 10-vane rotor design. It includes the rotor, vanes, rotor guide, pump slide and a...

4L60E Pump Hard Parts Kit | 13-Vane

Part number: PK4L60E-HPFits: 4L60E A hard parts kit supplies the internal wear components needed to rebuild a 4L60E/4L65E/4L70E pump built around the 13-vane rotor design. It covers the parts that...

4L60E Pump Pivot Slide Pin 8634097

Part number: 1151NFits: 4L60E A pump pivot slide pin for GM's 4L60E automatic transmission. This new aftermarket pin carries OEM part number 8634097, industry part number 65797HP, and is also...

4L60E Pump Seal Retainer

Part number: 1162Fits: 4L60E A pump seal retainer for GM 4L60E automatic transmissions, sold as a single retainer rather than with the pump seal or gasket included. It carries manufacturer reference...

4L60E Pump Stator Shaft Installer & Resizer

Part number: T-1503Fits: 4L60E Stainless steel installer and resizer for the Teflon rings on the GM 4L60E pump stator shaft.

4L60E Pump Thrust Washer

Part number: 1163AFits: 4L60E Pump thrust washer for 4L60E automatic transmissions, also listed for 700R4 and 4L65E applications, made as an OEM part. It sits between the pump and the drum, per the...

4L60E|4L60E|4L70E Oil Filter (2004-UP) Hummer H3 Colorado Canyon ONLY

Part number: 1021ACHFits: 4L60E/4L65E/4L70E · 2004-up An oil filter for General Motors Hummer H3, Colorado and Canyon 4L60E, 4L65E and 4L70E transmissions built from 2004 on. It has a custom notch...