6R60 6R75 6R80 6HP19 6HP26 6HP32 Oversized Pressure Regulator Valve Kit | Sonnax | SYS.DR-V

Product Description

6R60 6R75 6R80 6HP19 6HP26 6HP32 Oversized Pressure Regulator Valve Kit

FITS 6R80 (2009-2014). CANNOT BE USED IN UNITS THAT HAVE A 053 SEPARATOR PLATE

OE VALVE NAME: SYS.DR-V

Sonnax Part Number: 95740-01K

TOOLING REQUIRED

• F-95740-TL
• VB-FIX

WARNING: THERE ARE SOME SMALL DIAMETER AND LENGTH DIFFERENCES THAT CAN CAUSE FIT AND PRESSURE ISSUES IF MISMATCHED INTO THE WRONG APPLICATION.  IT IS RECOMMENDED TO MEASURE THE LOCATIONS SHOWN BELOW TO VERIFY THAT THE CORRECT OE OR REPLACEMENT PART IS FIT INTO THE APPROPRIATE APPLICATION DURING REBUILD.

Wear is commonly found at different areas in ZF6HP19/26/32 (Gen. 1) and Ford 6R60/6R80 pressure regulator bores. Wear at the sleeve end causes high line pressure leading to broken drums, pistons or other parts, as well as restricted converter/lubrication flow. Wear at the spring end of the bore allows low line pressure and lube/TC fluid to exhaust leading to a burned converter clutch and premature bushing failure. The Sonnax oversized pressure regulator valve kit 95740-01K restores valve-to-bore or sleeve clearances so the pressure regulator valve can maintain correct pressures.

• Hardcoat anodized aluminum valve combats premature wear
• Alloy aluminum sleeve is significantly more wear-resistant than the OE sleeve
• Salvages valve body castings

PACKAGE CONTAINS

• Valve (1)
• Sleeve (1)

SYMPTOMS

• Poor shift quality
• Flare shifts
• Harsh shifts
• Erratic line pressure
• Slips in Forward & Reverse
• Delayed Reverse
• No Reverse
• TCC slip

CAUSE

CORRECTION

Sonnax oversized pressure regulator valve kit restores the correct valve/bore clearances and line pressure control as well as prevent future wear in this area.