Product Description
6R100 6R60 6R75 6R80 6HP19 6HP26 6HP28 6HP32 Oversized Bypass Clutch Control Valve Kit
Sonnax Part Number: 95740-13K
TOOLING REQUIRED
- F-95740-TL13
- VB-FIX
NOTE: Kit is NOT compatible with ZF6HP21/24/34 (Gen.2) units.
OE Valve Name: WD-V
Common problems in vehicles equipped with ZF6HP19/26/32 (Gen. 1) and Ford 6R60, 6R80, 6R100 transmissions include torque converter clutch slip, firm shifts and an overheating torque converter. One cause of these problems is a worn bypass clutch control valve resulting in slow applyand release of the torque converter clutch. Installing the Sonnax oversized bypass clutch control valve kit 95740-13K restores factory torque converter clutch apply and release rates. This will resolve the converter slip, harsh shift and overheating problems.
- Hardcoat anodized aluminum valve combats premature wear
- Valve is tighter fit to the bore than OE for better sealing
- Valve has annular grooves for better centering in the bore
PACKAGE CONTAINS
- Valve
- Spring
- O-Ring
- End Plug
SYMPTOMS
- TCC codes
- Excess TCC slip
- Cycling RPM
- Low TCC release pressure
- Flare shifts
- Harsh shifts
- Rough idle in Reverse
- Overheated converter
CAUSE
The bypass clutch control valve controls torque clutch apply and release pressure. As the bore wears, the apply rate of the clutch slows and the clutch release pressure will not vent.
CORRECTION
Ream the bore to restore tolerance and install the upgraded Sonnax oversized bypass clutch control valve kit.
