Single Steel Plates

4L60E 700R4 4L65E 4L70E HD 3-4 Clutch Backing Plate Kit (1991-UP) Sonnax

Heavy Duty 3-4 Clutch Backing Plate KitPart No. 74140-01K Requires ‘91-later 3-4 apply ring stamped with number “7”, measuring 3.671–3.682" in height. A thin, weak backing plate is the leading cause of 3-4 clutch distortion...

700R4 4L60E 3-4 Clutch Kolene Steel Plate (1982-UP) 0.107''

This is a .107" high performance Kolene coated metal steel plate for the 3rd and 4th clutch pack in GM's 700R4 and 4L60E from 1982 and up.  

700R4 4L60E 3-4 Clutch Kolene Steel Plate (1982-UP) 0.078''

This is a .078" high performance Kolene coated metal steel plate for the 3rd and 4th clutch pack in GM's 700R4 and 4L60E from 1982 and up.  

4L60E 3-4 Steel Plate Kolene (.060") (1982-UP)

This is a high performance replacement 3-4 Kolene steel plate for GM's 700R4 and 4L60E/4L65E automatic transmissions.  The listing here is for the thin style 3-4 steel that measures 0.060'' thick.  This steel is often used in order to pack more...

700R4 4L60E 3-4 Steel Plate .078'' Thick (Medium Thickness)

GM TH700-R4, 4L60, 4L60E, 4L65E, 4L70E STEEL CLUTCH PLATE 1982-1993(Can be used in all years of the 700R4 and 4L60E) Clutch Position 3rd, 4th Part No. 511599 OE No. 8663633, 8671900, 8678053 Thickness in./mm .078/1...

700R4 4L60E 3-4 Steel Plate .060" Thick (Thin Style)

This is a high quality 4L60E thin style 3-4 clutch steel plate.  It takes 7-thin 3-4 steels to get your stack up correct in most cases when using thinner clutch plates.   OEM # 8663633

700R4 4L60E 3-4 Steel Plate .106" Thick (Normal 4L60E Thickness)

GM 4L60E 3-4 Clutch Steel Each 4L60E transmission takes 5 3-4 clutch steels .106"

700R4 Forward Steel .078" (1982-1984)

Steel, Forward Clutch, 4L60E (.078")(5 per Transmission) (Early)(1982-1984)

700R4 Waved Steel Reverse Input .080" Thick 36 Teeth 5.084" ID (1982-1986)

Steel, Waved, Reverse Input, 700R4, 4L60, .080" Thick, 36 Teeth, 5.084" Inner Diameter, 1982-1986

4L60E 4L65E 4L70E 3-4 Clutch Steel Plate (2001-UP) 0.095''

Teeth 20 Waved/Flat Flat Thickness (Inches) .095 Thickness (mm) 2.41 ID (Inches) 4.995 ID (mm) 126.87 NameYears 4L65-E 2001 - 2007 4L70-E 2006 - 2009

700R4 4L60E Overrun Clutch Kolene Steel Plate

This is a high performance overrun clutch steel plate that has been Kolene coated for heavy duty applications in GM 700R4 and 4L60E automatic transmissions.

700R4 4L60E 4L65E Forward Clutch Kolene Steel Plate

GM TH700-R4, 4L60E Forward Kolene steel, 0.090 inches thick Steel; Forward; .090"; Kolene

700R4 4L60E Low Reverse Clutch Kolene Steel

This is a high performance Kolene steel plate for the reverse clutch pack in GM's 700R4 and 4L60E transmission.

700R4 4L60E Reverse Input Clutch Steel - Kolene

This is a heavy duty Kolene coated Reverse Input clutch steel plate for GM's 700R4 and 4L60E automatic transmission.

4L60E Overrun Clutch Steel (1993-UP)

GM 4L60E Overrun Clutch Steel Each 4L60E transmission takes 2 reverse input clutch steels.

700R4 4L60E Low/Reverse Clutch Wave Plate (1982-UP)

GM 700R4 and 4L60E low-reverse clutch wave plate.  1982-UP

700R4|4L60E Reverse Input Clutch Dished/Coned Steel (1987-UP) Full Outer Teeth

GM 700R4 / 4L60E Reverse Input clutch dished steel with full outside teeth.  

4L60E Low-Reverse Clutch Steel (1993-UP)

GM 4L60E Low Reverse Clutch Steel Each 4L60E transmission takes 5 low reverse clutch steel

4L60E Forward Clutch Steel (1993-UP)

GM 4L60E Overrun Clutch Steel Each 4L60E transmission takes 5 reverse input clutch steels.

4L60E Reverse Input Clutch Steel (1993-UP)

GM 4L60E Reverse Input Clutch Steel Each 4L60E transmission takes 4 reverse input clutch steels.