Output Shafts

4L60E 4L65E 4L70E Front Reaction Shaft (2001-2006) Bearing Style

Part number: A74602A A front reaction shaft for GM's 4L60E, 4L65E and 4L70E automatic transmissions, the later bearing-style design used on production built from 2001 to 2006. This shaft is the...

4L60E 4L65E 4L70E Used Front Reaction Shaft (2001-2006 Bearing Style)

Part number: U74602A A used front reaction shaft, bearing style, for GM 4L60E and 4L65E automatic transmissions built 01-06 (2001-2006). It also fits the 4L70E in the same application. It has been...

4L60E 4L65E 4L70E Front Reaction Shaft (2007-2014) Bearing Style

Part number: A74602B A front reaction shaft for GM 4L60E, 4L65E and 4L70E transmissions (4L60E/65E/70E), covering the 2007-2014 model years. This is the bearing-style front reaction shaft, supplied...

4L60E Manual Shaft 2009-UP

4L60E Billet 300M 4×4 Output Shaft

Part number: 378100 A billet 300M output shaft for GM 4L60E automatic transmissions, sold by TCS and made from 300M billet material for heavy-duty, high-horsepower applications. It is heat treated...

Rear Hub/Reaction Shaft for Rear Planet (1982-UP) Oil Slinger Style

Part number: 1037B Rear Hub/Reaction shaft for rear Planet, 4L60E/700R4, Oil Slinger Style, 82-UP

700R4 Output Shaft w/ Governor Gear - 2WD (1983-1993)

Part number: 1062A A used 2WD output shaft with governor gear for GM's 700R4 automatic transmission, covering the 1983-1993 model years. It is sold as a used, inspected part, made in the USA, and the...

4L60E 4L65E 4L70E HD Output Shaft - 2WD/Corvette (1992-UP) Sonnax

Sonnax part number: 74678L-HDOE part no.: 24238748 Fits 2WD and Corvette applications only. Output shaft failure is common as power levels are increased in GM 4L60-E, 4L65-E and 4L70-E units. Sonnax...

4L60E 4L65E 4L70E HD Output Shaft - 4WD/AWD (1993-UP) Sonnax

Sonnax part number: 74678S-HDOE part no.: 24230983 Fits 4WD/AWD applications only. Output shaft failure is common as power levels are increased in GM 4L60-E, 4L65-E and 4L70-E units. Sonnax heavy...

700R4 Output Shaft, 4X4, 27-Spline, 13.25'' Long w/ Governor Gear (1983-1992)

Part number: 1070A A used 700R4 output shaft for 4X4 applications, with 27 splines and the governor gear, used 1983 to 1992. It measures 2-5/8 inch at the end spline and 13-1/4 inch long. It is sold...

4L60E Output Shaft Yoke Tube Shield

This is a new OEM output shaft sheild for GM 4L60E automatic transmisisons.

4L60E Output Shaft, 4X4, 27-Spline, 13.25'' Long

Part number: 1070 A cleaned and inspected 4L60E output shaft, 4X4, 27-spline, 13.25 inches long. It has been prepared for reuse in a transmission rebuild after inspection, replacing a worn, cracked,...

4L60E Output Shaft, 2WD, 4.5'' Splines, 18.5'' Long w/ Shield

Part number: 1063 A 4L60E output shaft for 2WD applications, 4.5 inch splines, 18.5 inch long, with the shield, cleaned and inspected before sale. It is sized specifically for 2-wheel applications on...

4L60E Output Shaft, 2WD, 4.5'' Splines, 18.5'' Long

Part number: 1062 A used 4L60E output shaft for 2WD applications, 18.5'' long with 4.5'' splines and a speed sensor pickup ring. It is made in the USA and sold individually as a single good used...