Product Description
With GASKET REMOVER, you can quickly and thoroughly remove gasket paper from separator plates in as quickly as 15-20 minutes! Instead of spending hours scraping the gasket paper off only to scratch and gouge the plate, simply soak the separator plate in the Gasket Wizard solution and watch the paper peel right off!
One (1) 200 g baggie of Gasket Remover Pellets
1. add 1 packet of gasket wizard to 1 gallon of cold water, do not add to hot water
2. submerge bonded separator plate in solution and allow to soak for 4-6 hours, or
until adhesive is dissolved.
3. when the bonding adhesive dissolves, the gasket material will release from the separator plate
4. rinse the plate with clean water
*gasket remover can be used until performance diminishes. follow all precautions.
do not use with aluminum
