Product Description
A404 A413 A470 A670 Governor Bracket & Spring Kit
Sonnax Part Number: 32204-03K
If the weight has a through bore, use the 9-coil light spring, not the 6-coil heavy spring. It is recommended to use a PTFE seal ring since cast-iron rings can contaminate the governor.
A common aftermarket fix for sticking primary weights is to install a spring inside the governor body of Chrysler A404, A413, A470 and A670 units. This approach often fails because the spring jams in the bore. Sonnax governor bracket and spring kit 32204-03K is designed so the spring is outside the governor body, safely returning the governor valve to the at-rest position at stops.
- Designed to return the primary weight to the at-rest position
- Two return springs are provided, one for 4-cylinder or turbo, and one for 6-cylinder applications
- No transmission removal required
- The use of this governor bracket and return spring will slightly increase shift timing
PACKAGE CONTAINS
- Bracket
- 9-Coil Light Wire Spring for 4-Cylinder or Turbo
- 6-Coil Heavy Wire Spring for V6
- Washers (2)
- Bolt
SYMPTOMS
- 2nd Gear starts
- No kickdown
- No upshifts
- Repeated governor hang-up
CAUSE
Sticking primary weights.
CORRECTION
Sonnax governor bracket and spring kit assists the return of the primary weight.
