Product Description
6HP19 6HP21 Sun Gear Shaft Bushing
FITS UNITS WITH 0.833'' (21.15mm) DIAMETER SHAFTS ONLY
Sonnax Part Number: 95030-06B
USE OF AN ARBOR PRESS IS REQUIRED FOR CORRECT INSTALLATION. DO NOT USE A HYDRAULIC PRESS OR BUSHING DRIVER/HAMMER COMBINATION TO INSTALL, AS DOING SO WILL DISTORT THE BUSHING AND CAUSE FITMENT ISSUES
The OE bushings located at front and rear of the sun gear shaft in ZF6HP19 and ZF6HP21 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes and burnt "B" clutches. Sonnax sun gear shaft bushing 95030-06B features superior wear characteristics, eliminating premature deterioration for worry-free operation. The Sonnax bushing's upgraded material composition outperforms the OE bushing.
PACKAGE CONTAINS
- Bushing (6)
SPECIFICATIONS
- Bushing Style: Precision
- Material: Bimetal
- Housing Bore: 0.953"
- Width: 0.394"
- Shaft Dia.: 0.833"
SYMPTOMS
- Bushing wear
- Bushing failure
- B Clutch burned
- Ratio codes
CAUSE
CORRECTION
Install improved Sonnax sun gear shaft bushings to restore critical clearances and resist untimely wear.
