Product Description
4R44E, 4R55E, 5R44E, 5R55E, A4LD
Relief Valve
Part No. 10000-02K
High radius
Package Quantity: 10
Sonnax offers relief valve 10000-01K to replace the various relief valves and drainback valves that are found in valve bodies. The design of the OE valves causes the separator plate and valve bore to wear. The result is leakage or valve sticking. The Sonnax valve is rounded so it seals against an unworn part of the separator plate and eliminates sticking problems.
The Sonnax valve is ideally suited for replacing the drainback valve on AXOD, AXOD-E, AX4N and AX4S units. The OE drainback valve frequently sticks in the bore. A common shop practice is to replace the OE drainback valve with a check ball. However, this practice requires shortening the spring. The Sonnax valve solves the sticking problem and is designed to work with the existing spring. No spring modifications are needed.
It is suggested to use a relief with a radius close to the OE so as to maintain the spring rate. On a severely worn plate or bore, a higher radius will allow for better plate contact and less bore hang-up.
- Works with existing spring
- No modifications needed
- Material: Steel
Symptoms:
- Pressure loss
- Converter drain back