Product Description
SONNAX PART NUMBER: 77980-01K
It is common for one of the three plastic retention tabs to break on the wiring harness case pass-through connector in GM 4L60-E, 4L65-E and 4L70-E units. This allows the connector to be pushed into the case when connecting the external harness. Not only does this require extra labor to fix, it also requires a new wiring harness. Sonnax wiring harness connector bracket 77980-01K retains the internal harness connector even though the retention tabs may be broken.
- Bracket firmly holds the connector in place from inside the pan using existing hardware
- Connector bracket saves expensive wiring harness replacement.
PACKAGE CONTAINS
- Bracket
SYMPTOMS
- Retention tabs break off wiring harness connector
- Connector pushed into pan area
CAUSE
The plastic retention tabs that hold the wiring harness connector in place are easily broken. Once broken, the connector may push into the case.
CORRECTION
Sonnax wiring harness connector bracket positively supports the connector and prevents it from pushing into the case even if the plastic retention tabs are broken.
